Basic Operations - Pioneer AVH-P3200BT Operation Manual

Section
04

Basic Operations

Basic Operations
1 1 1
3
Radio
Disc
iPod
SD
SD
AUX
1 Touch panel keys
1
Wed 28 may
2
12:45
PM
Radio
3
Front
4
Rear
Rear
5
View
6
Turning the unit on using the buttons
1 Press SRC/OFF to turn the unit on.
Turning the unit off using the buttons
1 Press SRC/OFF and hold until the unit turns off.
10
En
2 2 2
Wed 28 may
12:45
PM
4 5 6
Rear
Front
Rear
View
Displaying the source menu.
Switching to clock adjust-
ment display.
Refer to Setting the clock on
page 13.
Source icon
Selecting a favorite source.
When the source icon is not
displayed, it can be displayed
by touching the screen.
Switching the output source
for the rear monitor.
Refer to Setting rear monitor
output on page 73.
Switching the rear view
image on or off.
Turning the unit off.
Selecting a source using the buttons
1 Press SRC/OFF to cycle through the sources
listed below:
Selecting a source using the touch panel keys
1 Touch the source icon and then touch the desired
source name.
! Radio – Radio
! TV – Television
! Disc – Built-in DVD player
! USB/iPod – USB/iPod
! SD – SD memory card
! AV – AV input
! EXT1 – External unit 1
! EXT2 – External unit 2
! AUX – AUX
! TEL/Audio – Bluetooth telephone/audio player
(Function of AVH-P4200DVD)
! When the source icon is not displayed, it can be
displayed by touching the screen.
! While operating the menu, you cannot select a
source by touching the source icon.
Adjusting the volume
1 Press +/– (VOLUME/VOL) to adjust the volume.
Notes
! In this manual, iPod and iPhone will be re-
ferred to as "iPod".
! The USB/iPod icon will change as follows:
— USB is displayed when a USB storage de-
vice is connected.
— iPod is displayed when an iPod is con-
nected.
— USB/iPod is displayed when no device is
connected.
! When appropriately set up, the image from
the rear view camera can be displayed auto-
matically. For details, refer to Setting the rear
view camera (back up camera) on page 67.
! An external unit refers to a Pioneer product,
such as those which will be available in the fu-
ture. Although incompatible as a source, the
basic functions of up to two external units can
be controlled with this unit. When two exter-
nal units are connected, the external units are
automatically allocated to external unit 1 or
external unit 2.