Advertisement
Installation
❏ Installation Procedures (When not using Mounting Collar w)
Use the brackets supplied with your car when mounting this unit. The bracket shape and mounting method vary with car
manufacturers, car types and manufacturing year. Please consult your nearest dealer or installer.
7
Select mounting screws according to the hole positions and hole shape of the bracket.
t Round Head Screw (5 mmø x 6 mm)
u Round Head Screw (4 mmø x 3 mm)
y Flat-Head Screw (5 mmø x 6 mm)
Use the supplied Spacer i if mounting hole of your
car is shaped like below.
Mounting Hole
of a Bracket
(in section)
Bracket
t Round Head Screw
(5 mmø x 6 mm)
Existing Bracket (L) (Bracket originally attached to the car)
To Remove the Unit
q Push the right and left clamp plates outward, one at a time, and pull the unit toward yourself.
w After removing the right and left clamp plates, pull the unit with both hands till it comes out.
q
8
CQ-VX100N
(continued)
Reuse the two round head screws removed from the transportation brackets.
4 pieces
i Spacer
o Double-Faced Adhesive Tape
Push here to
remove the
clamp plates.
2 pieces
4 pieces
i Spacer
o Double-Faced
w
When using these
mounting holes
t Round Head Screw
(5 mmø x 6 mm)
Existing Bracket (R)
Adhesive Tape
Advertisement
