Dealing With Problems
Character Input
Unable to input anything
but numerals
Only capital letters are
being input
How to input European
characters (ß, à, ç) or
symbols is unclear
Setup Utility
is displayed
[Supervisor Setup] is not
displayed in the menu
[User Password] cannot be
selected
[Coffee break Password]
or [Key Combination for
Coffee break] cannot be
selected
[Supervisor Password]
cannot be set
If NumLk and Key Pad are on, the Numeric Key Pad is ON. To switch it OFF,
press Fn + Key Pad .
If CapsLock is on, the Caps Lock function is ON. To switch it OFF, press Caps Lock .
Select [Start] - [Programs] - [Accessories] - [Character Map]. The Character Map will be
displayed. Point to the desired font name and select it.
Enter the User Password or Supervisor Password. If you have forgotten it, contact Panasonic
Technical Support.
At the start of the computer when
word. When both the User Password and Supervisor Password have been set, if you enter
the User Password, [Supervisor Setup] will not be displayed.
If [Supervisor Setup] is not displayed even after entering the Supervisor Password, you have
to delete the User Password. Run the Setup Utility again, and input the Supervisor Password.
[User Password Protection] in [Supervisor Setup] may be enabled.
You need to set the User Password.
If the User Password has been set first, the Supervisor Password can not be the same as the
User Password. Another password needs to be entered.
is displayed, you have to enter the Supervisor Pass-
36