Changing The Player Settings - Panasonic DVD-S511 Operating Instructions Manual

Changing the player settings

1 2
Select
Shows
Setup
menu.
• The settings remain intact even if you switch the unit to standby.
• Underlined items are the factory preset.
The QUICK SETUP enables successive settings of the items in the shaded area.
"DISC" menu

SETTING STATE
Display the current setting of the items below
AUDIO ENGLISH FRENCH SPANISH GERMAN ITALIAN
Choose the audio
SWEDISH DUTCH POLISH ORIGINAL
language. OTHER ----
SUBTITLE
AUTO 3
Choose the subtitle
ITALIAN SWEDISH DUTCH POLISH OTHER ----
language.
MENUS ENGLISH FRENCH SPANISH GERMAN ITALIAN
Choose the language
SWEDISH DUTCH POLISH OTHER ----
for disc menus.
RATINGS Setting ratings (When level 8 is selected)
0 LOCK ALL: To prevent play of discs without ratings levels.
Set a ratings level to
limit DVD-Video play. 1 to 7: To prohibit play of DVD-Video with corresponding
8 NO LIMIT
When setting a ratings level, a password screen is shown.
Follow the on-screen instructions.
Do not forget your password.
A message screen will be shown if a DVD-Video exceeding
the ratings level is inserted in the unit. Follow the on-screen
instructions.
PASSWORD 1. Select "CHANGE" and press [ENTER].
Change the password 2. Enter the current password with the numbered buttons,
for "RATINGS" then press [ENTER].
( above). 3. Enter the new password with the numbered buttons, then
press [ENTER].
If "VERIFY" is displayed, please verify the password and
insert it again.
18
RQTC0145-B.indd 18
3
Select
Select the
menu.
Register
1
2
ENGLISH FRENCH SPANISH GERMAN
2
ratings recorded on them.
4
Select
Select the
item.
Register
"VIDEO" menu

SETTING STATE Display the current setting of the items below
TV ASPECT 4:3PAN&SCAN
Choose the setting to
16:9NORMAL
suit your television and
preference.
TV TYPE STANDARD CRT LCD PROJECTION PLASMA
Select to suit the type
2 of television.
TIME DELAY 0 ms
When connected with an 60 ms
AV amplifier and Plasma
display, adjust if you
notice the audio is out of
sync with the video.
NTSC DISC OUT NTSC: Output signals from NTSC discs remains as NTSC.
PAL60: NTSC discs can be viewed on PAL television.
Choose PAL60 or
NTSC output when
playing NTSC discs.
STILL MODE AUTO
Specify the type of FIELD: The picture is not blurred, but picture quality is lower.
picture shown when FRAME: Overall quality is high, but the picture may appear
paused. blurred.
VIDEO OUT-SCART VIDEO/YPbPr
Choose the video signal S-VIDEO/YPbPr
RGB/NO OUTPUT
format to be output
from the SCART and
COMPONENT VIDEO
OUT terminals
VIDEO OUT (I/P) INTERLACE PROGRESSIVE
Select "PROGRESSIVE" When you select "PROGRESSIVE", a message screen will appear.
only if connecting to •
a progressive output •
compatible television.
5
1 2 3
Make the
4 5 6
settings.
7 8 9
0
Register
4:3LETTERBOX 4:3ZOOM
16:9SHRINK 16:9ZOOM
20 ms 40 ms
80 ms 100 ms
For progressive output, press [e] and then press [ENTER].
Press [RETURN] to cancel.
Press to
exit.
2007-3-19 16:05:58