7 Tune to FM
radio stations
1
Ensure that you have connected and fully
extended the supplied FM antenna.
2
Press TUNER .
3
Press and hold
4
When [SEARCH] (search) is displayed,
release the button.
The FM tuner tunes to a station with
»
strong reception automatically.
5
Repeat steps 3-4 to tune to more stations.
To tune to a weak station:
Press
(
/ ) repeatedly until you fi nd
optimal reception.
Program radio stations
automatically
Note
•
You can program a maximum of 20 preset radio
stations.
1
Press /
to select a preset number to
start programing.
2
Press and hold PROGRAM for 2 seconds
to activate automatic programming.
[AUTO] (auto) appears.
»
All available stations are programmed
»
in the order of waveband reception
strength.
The last programed radio station is
»
broadcast automatically.
(
/ ).
Program radio stations
manually
Note
•
You can program a maximum of 20 preset radio
stations.
1
Tune to a radio station.
2
Press PROGRAM to activate programming.
3
Press /
to allocate a number from
1 to 20 to this radio station, then press
PROGRAM to confi rm.
The preset number and the frequency
»
of the preset station are displayed.
4
Repeat the above steps to program other
stations.
Note
•
To overwrite a programmed station, store another
station in its place.
Tune to a preset radio station
1
Press /
to select a preset number
that you want.
Tip
•
You can also use the numerical keypad to select a
preset station directly.
•
To enter a 2 or 3-digit number, press SHIFT , then enter
the number.
Set RDS clock
You can use time signal broadcast together with
the RDS signal to set the clock of the audio
system automatically.
EN
19