Install The Handset; Configure Your Phone (Country Dependent) - Philips XL590 User Manual

Install the handset

The batteries are pre-installed in the handset.
Pull the battery tape off from the battery door
before charging.
Caution
•
Risk of explosion! Keep batteries away from heat,
sunshine or fire. Never discard batteries in fire.
•
Use only the supplied batteries.
•
Risk of decreased battery life! Never mix different
brands or types of batteries.
Note
•
Charge the batteries for 8 hours before first use.
•
If the handset becomes warm when the batteries are
charging, it is normal.
Warning
•
Check the battery polarity when inserting in the
battery compartment. Incorrect polarity may damage
the product.
Configure your phone
(country dependent)
1
When using your phone for the first time,
you see a welcome message.
2
Press [OK].
Set the country/language
Select your country/language, then press [OK]
to confirm.
» The country/language setting is saved.
Note
•
The country/language setting option is country
dependent. If no welcome message is displayed, it
means the country/language setting is preset for your
country. Then you can set the date and time.
To re-set the language, see the following steps.
1
Select [Menu] > [Phone setup] >
[Language], then press [OK] to confirm.
2
Select a language, then press [OK] to
confirm.
» The setting is saved.
Set the date and time
Tip
•
To set the date and time later, press [Back] to skip this
setting.
1
Select [Menu] > [Phone setup] > [Date &
time], then press [OK] to confirm.
2
Press the numeric buttons to enter the
date, then press [OK] to confirm.
» The time setting menu is displayed on
the handset.
3
Press the numeric buttons to enter the
time.
Note
•
If the time is in 12-hour format, press
[AM] or [PM].
4
Press [OK] to confirm.
/ to select
EN 9