Change The Remote Access Pin Code; Charge The Handset - Philips XL390 User Manual

Set the date and time
Tip
•
To set the date and time later, press [Back] to skip this
setting.
1
Select [Menu] > [Phone setup] > [Date &
time], then press [OK] to confirm.
2
Press the numeric buttons to enter the
date, then press [OK] to confirm.
» The time setting menu is displayed on
the handset.
3
Press the numeric buttons to enter the
time.
Note
•
If the time is in 12-hour format, press
[AM] or [PM].
4
Press [OK] to confirm.
Change the remote access
PIN code
•
1
2
3
4
/ to select

Charge the handset

Place the handset on the base station to charge
the handset. When the handset is placed
correctly on the base station, you hear a docking
sound.
•
•
You can activate or deactivate the docking tone
(see 'Set the docking tone' on page 22) .
Your phone is now ready to use.
Note
The default answering machine remote access PIN
code is 0000 and it is important to change it to ensure
the security.
Select [Menu] > [Answ. Machine] >
[Remote access] > [Change PIN], then
press [OK] to confirm.
Enter the old PIN, then press [OK] to
confirm.
Enter the new PIN code, then press [OK]
to confirm.
Enter the new PIN code again, then press
[Save] to confirm.
» The setting is saved.
» The handset starts charging.
Note
Charge the batteries for 8 hours before first use.
If the handset becomes warm when the batteries are
being charged, it is normal.
EN 9