Making A Second Call - Philips Xenium User Manual

Cellular mobile radio gsm 900/gsm 1800
Hide thumbs Also See for Xenium:
Table of Contents

Advertisement

Interrogating your answering machine (example):
To hear all messages (code 3, say) on your answering machine (password 8421) at phone
number 12345678, you could call:
The phone dials 12345678 and waits for the call to connect. When connected, the phone
transmits 8421 (the password), pauses 2.5 seconds, and then sends the last digit.
If you find that 2.5 seconds is not long enough for your needs, you can enter several pause
characters one after the other to increase the pause time.

Making a second call

You can make a second call during an active call or during a call on hold. You can switch
between the two calls.
• Dial a number then press
The first call is placed on hold and the number is displayed at the bottom of the screen.
The second number is then dialled.
• To toggle between the two calls, press the Pilot Key
calls
.
Each time that you toggle from one call to another, the active call is placed on hold and
the call which was on hold is activated.
• To hang up the active line, press
The active line is hung up and the call on hold remains on hold.
• To end the call on hold, use Switch calls to reach it, then press
L
NOTES:
The second number can be dialled either from the keypad or from:
the Names list, by pressing the Pilot Key
the Call list, by pressing the Pilot Key
Depending on the subscriber's card.
* Depending on the country (see "Charge rate" page 33).
12345678w8421p3.
.
1.29 GBP*
, then selecting
Use of network services
.
Names
then
Call list
Switch
then select
.
.
53

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xenium tcd 998

Table of Contents