4
Select the conversion settings in the
[OPTIONS] panel, then press OK.
•
[Speed] : Selects the write-to-fi le
speed.
•
[Bitrate] : Selects the conversion
quality.
5
Press
to access the [TRACK] panel.
6
Select an audio track, then press OK.
•
[Select All] : Selects all tracks.
•
[
Deselect all] : De-selects all tracks.
7
Select [Start] in the menu to convert, then
press OK.
»
A new folder is created in the USB
storage device to store all the new MP3
audio fi les.
•
To exit the menu, select
press OK.
Note
•
During the conversion process, do not press
any buttons.
•
DTS CDs and copy-protected CDs cannot be
converted.
•
Write-protected or password-protected USB
storage device cannot be used to store MP3
fi les.
12
EN
6
This section helps you to change the settings of
your home theater.
•
Access the setup menu
1
[Exit] and
Symbol
2
3
•
Change settings
Caution
Most of the settings are already confi gured
with the best value for the home theater.
Unless you have a specifi c reason to change a
setting, it is best to leave it at the default value.
Press
SETUP.
»
The following menu appears.
Description
[General Setup]
[Audio Setup]
[Video Setup]
[Preference Setup]
Select a setup menu, then press OK.
See the following sections for information
about how to change the settings of your
home theater.
Press
BACK to return to the previous
menu, or press
SETUP to exit.
Note
You cannot change a setting that is grayed out.