Operating Elements; Commissioning; Boiling Water - Silvercrest KH 1142 Operating Instructions Manual

Hide thumbs Also See for KH 1142:
Table of Contents

Advertisement

Operating Elements

q
Pouring sieve
w
Lid
e
Release button
r
Handle
t
On/Off switch
y
Base
u
Power cable

Commissioning

Attention
Always and only use freshly drawn mains water in the
water boiler! Do not drink water that is not specifically
designated as drinking water. Otherwise, there is a risk
of sever damage to your health!
• Before taking the appliance into use, check to
ensure that ...
– the appliance itself, the plug and the power cable
u
are in a serviceable condition, and...
u
– the power cable
has been completely unwound
from the retainer under the base of the appliance,
and...
– all packaging materials have been removed from
the appliance.
• Fill the appliance with water up to the MAX
marking and let it come to a full boil once – as
described in the next section.
• After it has boiled, pour this water away.
• Rinse the appliance with freshly drawn water.
• Fill the appliance once again with water up to the
MAX marking on the scale and then bring it to the
boil. When done, pour this water away also.
The appliance is now ready for use.

Boiling water

Danger
y
NEVER place the electrical base
adjacent to
water – a potentially fatal risk!
Notice
Always use freshly drawn water. Do not consume
any water that has already stood in the water boiler
for longer than one hour. Do not reboil water that
has cooled down. Always pour old water away.
Microbes could have formed in it!
• Lift the kettle off of the base when filling it!
w
• Open the lid
by pressing down
e
on the release button
.
• Hold the carafe upright while filling it. Only in
this way can you correctly read the markings.
Fill the carafe...
– at least to the MIN mark, so that the appliance
does not overheat,
– no higher than the MAX mark, so that no boiling
water spills out.
w
• First close the lid
...
y
• and then place the carafe on the base
, such
y
that it is standing absolutely upright on the base
.
• Now insert the plug into the power socket.
t
• Press the ON/OFF switch
down until it engages.
• The integrated blue control lamp in the carafe
indicates that the appliance is now heating the
water up.
• The appliance switches itself off, and the blue
control lamps goes out as soon as the water is
t
on the boil. The ON/OFF switch
springs out.
Warning
Remove the power plug from the wall socket before
y
you take the kettle from the base
. This prevents
causing a potential short circuit by water possibly
spilling out of the carafe and falling onto live electrical
y
connections in the base
.
Page 3

Advertisement

Table of Contents
loading

Table of Contents