Before First Use; How To Boil Water; How To Make Coffee - Philips HD 7128 User Manual

Before first use

- Before using for the first time, operate the appliance once using water,
but without filling the filter with ground coffee. (See section "Making
coffee".)
- Next, clean the removable parts as described in section "Cleaning".
Note: During the first few times you may notice an odour and some slight
smoking. This is a normal occurrence and quite harmless.

How to boil water

- Place the heating unit on a dry, level, heat resistant surface.
- Pour water into the heating unit (maximum filling: 4.5 dl) (fig. 2).
- Place the lid on the heating unit. (fig. 3).
- Insert the mains plug into a wall socket (fig. 4). The pilot light comes on
and warming up begins.
- After approximately 7 minutes the water will be boiling. Unplug the
heating unit (fig. 5).

How to make coffee

- Boil water (see previous section).
- Insert the coffee filter into the coffee filter holder (fig. 6).
- Place the coffee filter holder on a mug as indicated in fig. 7A.
Both coffee outlet openings in the bottom of the holder must be
positioned over the mug.
Note: It is also possible to place the filter holder over two mugs simulta-
neously (fig. 7B). Each of the two mugs should be positioned under one
outlet opening.
The ridges at the under side of the filter holder provide stable
positioning if the mug(s) has (have) been placed correctly.
- Put ground coffee (fast filter type, quantity according to taste) into the
coffee filter holder (fig. 8). Spread the coffee evenly over the filter.
- Unplug the appliance when the water is boiling (fig. 9).
- Pour a small amount of the hot water into the coffee filter holder (fig. 10).
- Then slowly pour out the rest of it. Put the lid on top of the filter holder
to preserve temperature and taste (fig. 11).The hot coffee will drip into
the mug(s).
for (beef)tea etc.
7