(1) AC APPLICATION
(a)
Check the pilot lamp for proper voltage.
This generator is thoroughly tested and
adjusted in the factory. If the generator
does not produce the specified voltage,
consult your nearest
authorized service center.
(b) Turn off the switch (es) of the electrical
appliance (s) before connecting to the
generator.
(c) Insert the plug (s) of the electrical appli-
ance(s) into the receptacle.
Check the amperage of the receptacles
used referring to
not to take a current exceeding the
specified amperage.
Be sure that the total wattage of all
appliances dose not exceed the rated
output of the generator.
(d) Turn the no-fuse breaker to the posi-
tion "ON".
Makita factory or
TABLE 1,
and be sure
15
L A M P
P I L O T
ON
OFF