Table of Contents
Advertisement
You have just acquired your Mondo.
Before using it, you must first carry out the following operations, in the order in which
they are listed below:
• Insertion of the SIM card and the battery
1- Remove the stylus from its housing (fig.1).
This operation is necessary to unlock the cover of the battery housing.
2- Remove the battery housing cover (fig.2).
3- Open the SIM card holder (fig.3).
4- Insert the SIM card into its holder (fig.4).
PLEASE NOTE: The SIM card must be positioned in its holder with the gold contacts
downwards and the cut corner on the right, as shown in figure 3.
5- Close the SIM card holder (fig.5).
6- Insert the battery in its housing (fig.6).
7- Replace the battery housing cover (fig.7).
fig.1
12
Commissioning
fig.2
Advertisement
Table of Contents
