Anti-Skip System; Using The Unit With Optional Accessories - Panasonic SL-SW950 Operating Instructions Manual

Anti-Skip System

This system deals with skipping in a variety
of ways:
≥An anti-skip mechanism prevents skipping caused
when play speed changes due to swinging of the unit.
≥A recovery system immediately returns the laser pick-
up to its original position if it is knocked off the track by
a strong shock.
≥An anti-skip (max. 48 seconds) memory fills in inter-
ruptions caused by bumps and vibrations.
The anti-skip system works automatically while the
unit is on and cannot be canceled.

Using the Unit with Optional Accessories

Using the unit with an audio system
Use a stereo connection cable (not included) to listen to
CDs through your home audio system.
≥Turn off this unit and the other equipment before con-
nection.
≥Do not connect the cable to the PHONO jacks on the
amplifier.
≥Obtain the optional connecting cable if the other
equipment comes with mini-phone jacks.
≥Set this unit's volume to 10, then adjust the volume on
the other equipment.
5
When bumps continue repeatedly
The elapsed playing time disappears and sound is inter-
rupted.
S-XBS TRAIN
RANDOM 1 M
C
VOL
Headphone jack [Ë]
Other equipment
(White)
L
To CD or AUX
terminals
R
(Red)
Stereo connection cable (not included)
Note!
≥While the system is on, the disc rotates at a higher
rate than usual in collecting extra audio data. This
could result in a slight increase in disc rotation noise.
≥The anti-skip memory compresses digital signals.
Using the unit with a car audio
system
SL-SW951C includes a car adaptor and car stereo cas-
sette adaptor. Refer to the "Installation Instructions".
For SL-SW950, obtain the following, available as op-
tional accessories (part numbers are indicated in paren-
theses).
Use only the recommended car adaptor. Use of other
car adaptors can damage the unit.
For connection to the car audio system:
Car stereo cassette adaptor (SH-CDM10A)
Connect the car stereo cassette adaptor to [
the unit. (When doing this, set this unit's volume to
10.)
For connection to the power supply:
Car adaptor (SH-CDC9)
Note!
≥When you switch off the car, volume and sound quality
may return to the original settings and the resume
function may work even if you change the disc.
≥It may not be possible to use the unit with some types
of car stereo owing to restrictions imposed by the con-
struction of the car stereo cassette adaptor.
For further details, refer to the instructions of the part
concerned.
] on
Ë
RQT6446