[Panorama Assist]; [Night Portrait] - Panasonic Lumix DMC-FT3 Operating Instructions Manual

You can take pictures with connections suitable for creating panorama images.
∫ Setting the recording direction
1 Press 3/4 to select the recording direction and then press [MENU/SET].
•
The horizontal/vertical guideline will be displayed.
2
Take the picture.
•
You can retake the picture by selecting [Retake].
3
Press 3 to select [Next] and then press [MENU/SET].
•
Part of the recorded image is displayed as a transparent image.
4 Take picture after moving the camera horizontally or
vertically so the transparent image overlaps.
•
When taking the third and later pictures, repeat steps
5
Press 3/4 to select [Exit] and then press [MENU/SET].
Note
•
The focus, zoom, exposure, White Balance, shutter speed and ISO sensitivity are fixed to the
settings for the first picture.
•
We recommend using a tripod. When it is dark, we recommend using the Self-timer for taking
pictures.
•
Shutter speed may slow down up to 8 seconds.
•
The shutter may remain closed (max. about 8 sec.) after taking the picture because of signal
processing. This is not a malfunction.
•
The recorded images can be combined into panorama pictures using the software
"PHOTOfunSTUDIO" on the CD-ROM (supplied).
This allows you to take pictures of a person and the background with near real-life
brightness.
∫ Technique for Night Portrait Mode
•
Use the flash. (You can set to [‹].)
•
Ask the subject not to move while taking a picture.
Note
•
We recommend using a tripod and the Self-timer for taking pictures.
•
Shutter speed may slow down up to 8 seconds.
•
The shutter may remain closed (max. about 8 sec.) after taking the picture because of signal
processing. This is not a malfunction.
•
Noise may become visible when you take pictures in dark places.
Recording

[Panorama Assist]

[Night Portrait]

- 71 -
3 4
and .