Panasonic Lumix DMC-FT3 Operating Instructions Manual page 18

∫ About the [CHARGE] indicator
The [CHARGE] indicator turns on:
The [CHARGE] indicator
The [CHARGE] indicator turns off:
The [CHARGE] indicator
problem.
•
When the [CHARGE] indicator flashes
–
The battery temperature is too high or too low. It is recommended to charge the battery again
in an ambient temperature of between 10 oC to 30 oC (50 °F to 86 °F).
–
The terminals of the charger or the battery are dirty. In this case, wipe off the dirt with a dry
cloth.
∫ Charging time
Charging time
•
The indicated charging time is for when the battery has been discharged completely.
The charging time may vary depending on how the battery has been used. The charging
time for the battery in hot/cold environments or a battery that has not been used for long
time may be longer than normal.
Note
•
Do not leave any metal items (such as clips) near the contact areas of the power plug.
Otherwise, a fire and/or electric shocks may be caused by short-circuiting or the
resulting heat generated.
•
The battery becomes warm after using it and during and after charging. The camera also
becomes warm during use. This is not a malfunction.
•
The battery can be recharged even when it still has some charge left, but it is not
recommended that the battery charge be frequently topped up while the battery is fully
charged. (Since characteristic swelling may occur.)
Preparation
is turned on during charging.
A
will turn off once the charging has completed without any
A
- 18 -
Approx. 130 min