Functional Description - Makita 3709 Instruction Manual

FUNCTIONAL
DESCRIPTION
1
5
2
1. Base
2. Scale
3. Bit protrusion
4. Clamping nut
5. Adjusting screw
1
1. Switch lever
ASSEMBLY
1
2
3
1. Loosen
2. Tighten
3. Hold
6
CAUTION:
• Always be sure that the tool is switched off and unplugged before
adjusting or checking function on the tool.
Adjusting bit protrusion
006613
To adjust the bit protrusion, loosen the clamping nut and move the tool base up
3
or down as desired by turning the adjusting screw. After adjusting, tighten the
clamping nut firmly to secure the tool base.
4
Switch action
006614
To start the tool, move the switch lever to the I (ON) position. To stop the tool,
move the switch lever to the O (OFF) position.
CAUTION:
• Always be sure that the tool is switched off and unplugged before
carrying out any work on the tool.
Installing or removing trimmer bit
006615
CAUTION:
• Use only the wrenches provided with the tool.
Insert the bit all the way into the collet cone and tighten the collet nut securely
with the two wrenches.
To remove the bit, follow the installation procedure in reverse.