PANASONIC DVD-S58 Operating Instructions Manual: Playback Features; Starting Disc Playback; Basic Playback Controls

Hide thumbs

Advertisement

Playback Features

Starting disc playback
Turn on the TV and select the correct
1
video input.
Press 8 to turn on the DVD player.
2
Press OPEN/CLOSE ; to open the disc
3
tray.
Place a disc into the disc tray with the
4
label facing up, then press OPEN/CLOSE
; to close the disc tray.
For double-sided discs, load the side
which you want to play facing up.
Playback may start automatically.
5
If not, press PLAY/PAUSE q/h.
If a disc menu appears on the TV, see
next page > Using the disc menu.
If the child lock was activated for the
inserted disc, you have to enter your four-
digit password (see DVD Menu options >
Password). (
page 29)
See the next few pages for other
playback features under ' Playback
features '.
Tips:
Do not overturn the DVD player while
disc loading, playing or ejecting.
Do not close the disc tray manually
even if the standby/on switched off.
Tips: The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the discs.
18
Basic playback controls
Unless otherwise stated, all operations
described are based on remote control use.
Pausing playback
During playback, press PLAY/PAUSE q/h
1
to pause playback and display a still picture.
Sound will be muted.
To resume normal playback, press PLAY/
2
PAUSE q/h again.
Skipping title/chapter/track
To select sequentially
Press SKIP u / i to go to the
previous or next title/chapter/track.
To select directly (chapter/track only)
Use the numeric keypad (0-9) to enter
valid chapter/track number.
e.g., 5: 5
15: > = 10
Stopping playback
Press STOP g.
The stopped position is memorized.
Resume play function
Press PLAY/PAUSE q/h to restart from
this position.
The position is cleared if the tray is
opened or you press STOP g several
times to display 'g' on TV's display.
Tips:
Screen saver will start automatically if
the disc playback is stopped for about
5 minutes.
The player will automatically switch to
Power Standby mode if you do not press
any buttons for about 25 minutes after the
disc has stopped playing (only when {Auto
Power Off} is set to {On}) (
1
5
page 26).

Advertisement

   Also See for PANASONIC DVD-S58

This manual also for:

Dvd-s38

Comments to this Manuals

Symbols: 0
Latest comments: