Recording The Outgoing Messages - AEG Birdy Operating Manual

To play back the default outgoing messages:
1. Press the program key
tion mode.
2. Press the asterisk key
3. Press numerical key 5
4. Default outgoing message 1 or 2 is played back.
8.6

Recording the Outgoing Messages

You can personalise the outgoing messages (1 and 2) by overwriting the
default outgoing messages (1 and 2). Both outgoing messages must last at least
5 seconds, but may not last longer than 2 minutes. Speak with a loud and clear
voice at 5-10 cm from the microphone (7).
a) Recording Outgoing Message 1
1. Press the program key
tion mode.
2. Press numerical key 0. The display shows SET.
3. Press numerical key 1
4. You will hear a long beep indicating the beginning of recording.
5. Record your message.
6. Press numerical key 6
7. You will hear a long beep indicating the end of recording.
8. The phone will play back the outgoing message 1 you just finished record-
ing.
If your message is not satisfactory, you can restart the recording procedure until
you are satisfied.
Example of an Outgoing Message 1: "Hello, you have reached X. I am not in
at the moment, but if you leave a message after the beep, I will recall you as
soon as possible."
b) Recording Outgoing Message 2
1. Press the program key
tion mode.
2. Press numerical key 0. The display shows SET.
3. Press numerical key 3
4. You will hear a long beep indicating the beginning of recording.
5. Record your message.
6. Press numerical key 6
7. You will hear a long beep indicating the end of recording.
36
(4) twice to access answering machine opera-
. The cassette icon
.
(4) twice to access answering machine opera-
. The display shows SET ANN1.
to end recording.
(4) twice to access answering machine opera-
. The display shows SET ANN2.
to end recording.
is displayed.