2
1
2
3
4
16
b
a
Playing Video CDs
(with playback control)
PBC Play
(See description of terms on page 66.)
The method described below is for video CDs with playback
control (PBC). If the video CD is not PBC supported, refer
to page 20.
Preparation:
1
Switch on the TV and select the VIDEO input mode.
1
Slide [OPEN :] to open the lid, and
insert the video CD.
a Label must face upward.
Press the area near the center of the disc until it
clicks into position.
b Close the lid.
2
Set play mode selector to [NOR].
When set to [NOR], PBC mode is engaged
automatically.
3
P r e s s [ : / J S E L E C T ] ( u n i t ) o r
[:SELECT] (wireless remote control).
The unit comes on and a menu appears on the TV
(it may not appear immediately).
Note
[:SELECT] on the wireless remote control does not
turn the unit on if the unit is being powered by batteries.
4
Select an item and start play.
1 On the unit: Press the cursor button
[ALBUM
MENU ∂] to select an item and press
[ :/J SELECT].
ALBUM
/MENU o :
to select the next item in ascending order
ALBUM
/MENU p :
to select the next item in descending order
The display shows the menu number and then play
starts.
2 On the wireless remote control: Press the
numeric buttons.
To select a two-digit menu number:
Press [h10] then the numeric buttons corresponding
to the menu number.
Example: 20: [h10]
5
Adjust the TV volume.
Please refer to the TV operating instructions manual
for adjusting the TV volume.
Menus depend on the discs. Read the disc's
instructions and screen display when selecting menu
items.
For your reference:
Concerning the display that appears on the TV, refer
to page 64.
Note
Play may stop if the disc is scratched or damaged. If this
happens, set play mode selector to [PBC OFF]. Press
[:/J SELECT] on the unit or [:SELECT] on the wireless
remote control and regular play will start (See page 20).
/MENU µ] or [ALBUM
2]
0]
/