Installation; Location; Climate Range; Ventilation - Miele FN 4857 S Operating And Installation Instructions

Installation

Do not place any appliance which
gives off heat, such as a toaster or
microwave oven, on top of this
appliance, as this would increase
the appliance's energy consumption.
This appliance has side wall
heating, and can be installed
directly next to another refrigerator
or freezer.
Ask your dealer which models can
be combined with your refrigerator.

Location

The appliance should be installed in a
dry, well-ventilated room.
The room temperature should not go
above or below the climate range for
which the appliance is designed.
The higher the ambient temperature of
the room, the more energy the
appliance requires to operate.
It should not be installed where it is
exposed to direct sunlight or directly
adjacent to a heat-producing appliance
such as an oven or a radiator.

Climate range

The appliance is designed for use
within certain climate ranges (ambient
temperatures), and should not be used
outside this range. The climate range of
the appliance is stated on the data
plate inside the appliance.
30
Climate range
SN
N
ST
T
SN-ST
SN-T
The appliance will function perfectly
down to an ambient temperature of
+5 °C.

Ventilation

Air at the back of the appliance gets
warm. To ensure sufficient ventilation,
the ventilation gaps must not be
covered over. The air inlet and outlet
must not be covered or blocked in any
way. They should be dusted on a
regular basis.
Installation
^ Remove any cable clips from the
back of the appliance.
^ Check that all parts at the back of the
appliance are unhindered. Carefully
remove any hindrances.
^ Carefully push the appliance into
position. The appliance can be
placed directly against a wall.
Ambient room
temperature
+10 °C to +32 °C
+16 °C to +32 °C
+18 °C to +38 °C
+18 °C to +43 °C
+10 °C to +38 °C
+10 °C to +43 °C