Cleaning And Care; Interior And Accessories; Ventilation Gaps; Door Seal - Miele F 456 i-2 Operating And Installation Instructions

Table of Contents

Advertisement

Never use cleaning agents
containing abrasive substances
such as sand, soda, acids or
chemical solvents.
"Non-abrasive" cleaning agents are
also unsuitable as they can cause
matt areas to appear.
Door fronts should be cleaned using
a solution of warm water with mild
detergent applied with a soft cloth or
with a suitable cleaning agent for the
type of door panel fitted.
Make sure that no water can
penetrate into the electronic unit.
Never use steam cleaning
apparatus to defrost or clean the
appliance. The steam could attack
the electrical components and
cause a short circuit.
The data plate located inside the
appliance must not be removed. It
contains information which is
required in the event of a service
call.
^ Clean the appliance immediately
after defrosting it.
Before cleaning
^ Switch the appliance off. Remove the
frozen food from the freezer and
place it in another freezer or cool box
or wrap it in several layers of
newspaper or cloths and store in a
cool place until the freezer is ready
for use again.

Cleaning and care

^ Take out any removable parts for
cleaning e.g. drawers.

Interior and accessories

Use lukewarm water with a little mild
detergent. All accessories should all be
hand washed. Do not wash in a
dishwasher.
^ After cleaning wipe the interior and
accessories with a damp cloth and
dry with a soft cloth. Leave the door
open to air the appliance for a short
while.
E-Cloth
^ A microfibre "E-Cloth" is available
from the Miele UK Spare Parts
Department, Part Number 980 13530,
which is suitable for cleaning
surfaces such as stainless steel,
glass, plastic and chrome without the
use of chemicals.

Ventilation gaps

^ The ventilation gaps should be
cleaned on a regular basis with a
brush or vacuum cleaner. A build up
of dust will increase the appliance's
energy consumption.

Door seal

Do not use any oils or grease on the
door seals as these will cause the
seals to deteriorate and become
porous with time.
The door seals should be cleaned
regularly with clean water and then
wiped dry with a soft cloth.
25

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents