Panasonic Lumix DMC-FT25 Operating Instructions Manual page 93

2
Press 3/4 to select [Start Shooting] and then press [MENU/SET].
3
Press the shutter button fully.
•
The recording starts automatically.
•
If the recording interval is set to 40 seconds or more, this unit will turn off automatically while in
recording standby. [Time Lapse Shot] is continued even with this unit turned off. When the
recording start time arrives, this unit turns on automatically. To turn on this unit manually, press
the camera [ON/OFF] button or press and hold [(].
•
To stop the Time Lapse Shooting partway through, press [MENU/SET] or [(] while this unit
turned on, and end the recording on the displayed confirmation screen.
•
This function is not for use in a security camera.
•
If you leave the unit somewhere to perform [Time Lapse Shot], please be careful of theft.
•
Recording for long periods in cold places such as ski resorts or places at high altitude, or in
warm, wet environments may cause a malfunction, so please be careful.
•
When the recording interval is set to a value of less than 1 minute and the previous recording has
not finished yet, recording may be skipped.
•
We do not recommend using [Time Lapse Shot] while underwater.
•
When the recording warning is set to [ON], a warning sound will be emitted. Check this setting is
suitable for the recording environment.
•
The unit is fixed to the zoom position prior to the start of recording.
•
We recommend to use a fully charged battery.
•
In situations that require longer recording time such as when recording in [Starry Sky] of the Scene
Mode or when recording in a dark place, we recommend you use an AC adaptor (optional).
•
[Time Lapse Shot] will be cancelled partway through in the following cases.
–
When the charge on the battery runs out
–
When the number of recordable pictures drops to none
•
Do not connect the AV cable (optional) or the USB connection cable (supplied) during Time Lapse
Shooting.
Recording
- 93 -