Panasonic Lumix DMC-FT25 Operating Instructions Manual page 50

[Format]
•
Use a battery with sufficient battery power or the AC adaptor (optional) when formatting. Do not turn
the camera off during formatting.
•
If a card has been inserted, only the card is formatted. To format the built-in memory, remove the
card.
•
If the card has been formatted on a PC or other equipment, format it on the camera again.
•
It may take longer to format the built-in memory than the card.
•
If you cannot format, contact the dealer or Panasonic.
~ [Language]
•
If you set a different language by mistake, select [~] from the menu icons to set the desired
language.
[Stabilizer Demo.]
•
The Stabiliser function is switched between [On] and [Off] every time [MENU/SET] is pressed.
•
[Stabilizer Demo.] is an approximation.
The built-in memory or card is formatted. Formatting irretrievably
deletes all the data so check the data carefully before formatting.
Set the language displayed on the screen.
Displays the amount of jitter the camera has detected.
A Amount of jitter
B Amount of jitter after correction
Basic
- 50 -
A B