Specifications; Optional Accessories - Panasonic BM-ET500E Operating Instructions Manual

SPECIFICATIONS

General
Power source:
Power consumption:
Iris recognition time:
Ambient operating temperature:
Ambient operating humidity:
Dimensions:
Weight:
Input/Output
CCTV camera output:
*The third-party external power-control unit should meet the following standards.
Output voltage:
Output current capacity:
Rated ripple voltage/Ripple noise:
Overcurrent protection:
Note: We recommend the use of a third-party external power supply when the iris camera is located
more than 20 meters (65 ft.) away from the control unit.

OPTIONAL ACCESSORIES

Mounting bracket ............................................ 1 pc.
Screw nut (M5) ................................................ 1 pc.
*1
Screw Driver tool
(for tamperproof screws) ................................ 1 pc.
Video output cable
(for the built-in colour CCTV camera) ............. 1 pc.
Operating instruction sticker
Operating instructions (this book).................... 1 pc.
*1 You will use it for installation. Keep it in safe place after use.
*2 Stick to a viewable area (except for the front panel) if necessary.
18
32 V, 3 A DC (when supplied from Control Unit BM-ED500)
24 V, 4 A DC (when supplied from an external power control unit
30 W (while waiting)
60 W (max. while operating)
3 seconds
0 °C to +40 °C (32 °F to 104 °F)
30 % to 80 %
430 mm (W) x 211 mm (H) x 80 mm (D)
17 in. (W) x 8-3/10 in. (H) x 3-1/10 in. (D)
4.5 kg (10 lbs.)
1 V[p-p]/75
24 V DC ± 0.5 V
0 A to 4.5 A
150 mV[p-p] or less
Enabled (mandatory)
*2
........................ 1 pc.
*
)