Removal Of Memory Cards/Usb Memory Sticks From The Memory Card Slot; Playing Back Dvds, Vcds Or S-Vcds - Silvercrest KH 6515 Operating Instructions Manual

KH6515_16_A4_C_V3_EN.qxd 23.08.2006
MermoryStick memory cards (MS/MSPro)
MemoryStick memory cards must be inserted into the upper
memory card compartment. Insert MF memory cards into the
upper memory card compartment contacts first and straight.
For this purpose...
- the side of the memory card that the contacts are on must
be facing downwards and
- the slanted corner of the memory card must be on the left
side.
USB memory sticks (USB)
The DVD player supports USB memory sticks 1.1 and 2.0 up to
a capacity of 512 MB.
USB memory sticks must be inserted into the USB port.
• If the USB memory stick is inserted correctly into the port
the green control light next to the lower loading slot will
light up.
• Press the button "DVD/Card/USB" on the remote control
to show the contents of the memory card.
9.3. Removal of Memory cards/USB Memory sticks from the
memory card slot
Memory cards/USB Memory sticks should only be removed
after the memory card slot is deactivated. Thus avoiding
the possibility of damage or data loss.
• Press the button "DVD/Card/USB" on the remote control
to return to the DVD mode. The green control light next
to the memory card slot will go out.
• You can now remove the memory card/USB memory stick
from the memory card slot.
14:19 Uhr Seite 15

10. Playing back DVDs, VCDs or S-VCDs

To play back a DVD/VCD/S-VCD with the DVD player...
• Switch on your television.
• Make sure that the DVD player is ready for operation.
If the television, the DVD player and possibly other connected
devices (i.e. an audio component) are ready for operation and
are switched on and the DVD player is connected correctly to the
television you will now see the Silvercrest logo on the TV screen
• Open the disc tray on the front panel of the DVD player by
"Open" will now appear In the display on the front panel of
the DVD player and on the television screen.
• Insert a DVD/VCD/S-VCD disc in the disc tray with the inscribed/
• Press the button
"Close" will appear in the display on the front panel of the
DVD player and on the television screen while the disc tray
is closing.
• The contents of the inserted DVD/VCD/S-VCD will now be
• Playback of the inserted DVD/VCD/S-VCD starts automatically.
DVDs, VCDs and S-VCDs, that you want to playback with the
DVD player possibly have a country code, which is printed on
the DVD cover.
The DVD player can only playback DVDs/VCDs/S-VCDs with
the country code 2.
If no country code is printed on the cover of a DVD/VCD/
S-VCD...
• but instead the symbol
• Then the DVD/VCD/S-VCD can possibly not be played back
- 15 -
pressing the button "Open/Close" on the front panel of
the DVD player or on the remote control.
labled side up.
"Open/Close" on the front panel of the
DVD player or on the remote control again to close the
disc tray.
loaded; this may take a few seconds. Meanwhile "Load"
will flash in the display on the front panel of the DVD player
and "Read" will appear on the television screen.
NOTE:
, then the DVD/VCD/S-VCD can
be played back with the DVD player
with the DVD player. You can check this by attempting to
play back the DVD.
KH 6515/6516