Using The Osd Menu; Language Settings; Video Settings - Silvercrest KH 6515 Operating Instructions Manual

KH6515_16_A4_C_V3_EN.qxd 23.08.2006

8.1. Using the OSD Menu

To summon the DVD player's OSD Menu...
• Press the "Setup" button on the remote control.
The OSD Menu with its menu options will appear on
the television screen:
The following menu options can be set:
Language, Video, Audio, Rating and Misc.
• The control buttons
OSD Menu. To confirm a selection or input press the "OK"
button.
• To exit the selected OSD Menu option press the control
button , until the left Menu tab (Language, Video etc.)
is active. Select another Menu tab with the control buttons
and activate the OSD Menu option with the control
button .
• To exit the OSD Menu press the button "Setup" again.

8.2. Language Settings

You can preset the languages for the Menu-language, DVD-
Menu, Subtitles, Audio and DivX Subtitles functions. These
settings are valid for every DVD if the selected language is
present on the DVD.
- OSD Language: Here you set the language, in which the
OSD Menu will be displayed on the tele-
vision screen.
- DVD menu: Here you set the language, in which the
DVD Menu will be displayed on the tele-
vision screen. Not all films contain a menu
on the DVD. If a menu is available then
it can only be shown in the language
that you set if this language is available
on the DVD. If the selected language is
not available then the DVD Menu will
be displayed in another language.
14:19 Uhr Seite 11
will move you through the
- DVD subtitle: Here you set the language of the subtitle
when the playback of a DVD is displayed
on the television screen
(only if the language is present on the DVD).
- Audio: Here you set the language, in which the
DVD should be started. Films can then
only be played back in the language that
you selected if this language is available
on the DVD. If the selected language is
not available the DVD will start with
another language.
- DivX Subtitle: Here you set the character encoding for
the DivX Subtitle. The standard setting
is Western European.
- DivX Sub Position: Here you set the position (Bottom/
Middle/Top) of the DivX Subtitles.

8.3. Video settings

In this OSD Menu you can administer the settings for Aspect
ratio, View Mode, TV-System, Video-Output, Brightness and
Sharpness, HD resolution and HD-JPEG mode.
- Aspect Ratio: Here you set the Image format, in which
the film should be displayed on the tele-
vision screen (4:3 or 16:9). The correct set-
ting depends on the television to which
you would like to connect the DVD player.
- View Mode: Here you can adapt the Height and width
of the Image to the playback device
being used, for example Pan & Scan
(Adaptation of Image width formats
to the 4:3 Image).
- TV-System: Here you set the TV-Standard (PAL/NTSC/
Multi) of your playback device. Only set
"Multi" if you have connected the DVD
player to a Multi standard television.
- Video-Output: Here you set the Video-Output, through
which the DVD player is connected to the
playback device.
IMPORTANT!
In the event that you set an incorrect Video-Output, for example
"P-Scan", although your television is not capable of Progres-
sive Scan, then the television screen will suddenly become
black.
This is not a defect of the television or the DVD player!
In a case such as this...
• Press the "Stop" button on the front panel of the DVD
player or on the remote control.
- 11 -
KH 6515/6516