Removal steps of LCD cable
Peel off the adhesive tape and detach the connector.
When installing: Make sure that the connector is attached firmly.
2040 Antenna assembly
For access, remove these FRUs in order:
•
"1010 Battery pack" on page 44
•
"1020 Bottom slot cover" on page 44
•
"1080 Keyboard" on page 51
•
"1090 Keyboard bezel" on page 54
•
"1130 System board assembly" on page 63
•
"1140 LCD unit" on page 65
•
"2010 LCD front bezel" on page 72
•
"2030 LCD panel, LCD cable, and hinges" on page 74
Removal steps of antenna assembly
Detach the antennas in the direction shown by the arrows
76
Hardware Maintenance Manual
1
.