Speaker Control - Panasonic SC-PTX50 Operating Instructions Manual

Speaker control

You can select whether audio is output from the home theater system or
the television speakers by using the television menu settings. For details,
refer to the operating instructions of your television.
Home Cinema
Theater speakers are active.
≥ When the home theater system is in standby mode, changing the
television speakers to theater speakers in the television menu will
automatically turn the home theater system on and select "AUX"
§
"D-IN" as the source.
≥ The television speakers are automatically muted.
≥ You can control the volume setting using the volume or mute button on
the TV's remote control. (The volume level is displayed on the main
unit's FL display.)
≥ To cancel muting, you can also use the home theater remote control
(➜ page 10).
≥ If you turn off the home theater system, television speakers will be
automatically activated.
TV
Television speakers are active.
≥ The volume of the home theater system is set to "0".
– This function works only when "DVD/CD", "USB", "AUX"
selected as the source on the home theater system.
≥ Audio output is 2-channel audio.
≥ When switching between the theater and television speakers, the TV
screen may be blank for several seconds.
§
To toggle which input source the main unit will automatically switch to,
press [SETUP] while the main unit is in "AUX" or "D-IN" mode.
– The default setting is "AUX".
VIERA Link Control only with TV's remote
control (for "HDAVI Control 2")
You can control the disc menus of the home theater system with the TV's
remote control when using the "DVD/CD" or "USB" source. When
operating the TV's remote control, refer to the below illustration for
operation buttons.
1 Select the theater operation menu by using the television menu
settings.
§
or
(For details, refer to the operating instructions of your television.)
≥The home theater system will automatically switch to "DVD/CD" if it
is in "AUX"
§
To toggle the mode that this function works with, press [SETUP]
while the main unit is in "AUX" or "D-IN" mode.
–The default setting is "AUX".
2 Select the desired item.
§ §
or "D-IN" is
≥"TOP MENU":
≥"MENU":
≥"Control Panel": The basic operations for discs are available.
[Note]
≥ Depending on the menu, some button operations cannot be performed
from the TV's remote control.
≥ "Control Panel" can be selected directly by using a button on the TV's
remote control (e.g. [OPTION]).
≥ You cannot input numbers with the numbered buttons on the TV's
remote control ([0] to [9]). Use the home theater's remote control to
select the playlist etc.
§ §
or "D-IN" mode.
Shows a disc top menu
(➜ page 15, 18) or program list (➜ page 19).
Shows a disc menu (➜ page 15, 18) or play list
(➜ page 19).
ENTER/
PLAY
RETURN
VIERA Link
TOP MENU
MENU
Control Panel
PAUSE
PLAY
SKIP SKIP
RETURN
STOP
27