PREPARATION BEFORE OPERATION
Indoor Unit
4
Insert the air purifying filters
5
Insert the air filters
Notes
•
If the unit is not going to be used for an extended
period of time, turn off the main Power supply. If it
is left at the ON position, approximately 2.5 W of
electricity will be used even if the indoor unit has
been turned off with the remote control.
•
If operation is stopped, then restart immediately,
the unit will resume operation only after 3 minutes.
11
Ensure the power plug is securely inserted.
A loose plug may cause a fire or an electric shock.
6
Close the front panel
Use under the following conditions
DBT: Dry Bulb Temp
WBT: Wet Bulb Temp
Maximum Temperature
Minimum Temperature
!
Warning
1
Connect the power
supply cord to an
independent power
supply.
2
Open the front panel
3
Remove the air filters
Indoor
DBT
WBT
32
16
(Unit in °C)
Outdoor
DBT
WBT
23
43
26
11
16
11