Panasonic TX-P50VT50Y Operating	 Instruction

Panasonic TX-P50VT50Y Operating Instruction

Plasma televison
Hide thumbs Also See for TX-P50VT50Y:
Table of Contents

Advertisement

Operating Instructions
Plasma Television
Thank you for purchasing this Panasonic product.
Please read these instructions carefully before operating this product and
retain them for future reference.
The images shown in this manual are for illustrative purposes only.
Please refer to Pan European Guarantee Card if you need to contact your
local Panasonic dealer for assistance.
English
Model No.
TX-P50VT50Y
TX-P55VT50Y
TX-P65VT50Y
TQB0E2266U

Advertisement

Table of Contents
loading

Summary of Contents for Panasonic TX-P50VT50Y

  • Page 1 TX-P55VT50Y TX-P65VT50Y Operating Instructions Plasma Television Thank you for purchasing this Panasonic product. Please read these instructions carefully before operating this product and retain them for future reference. The images shown in this manual are for illustrative purposes only. Please refer to Pan European Guarantee Card if you need to contact your local Panasonic dealer for assistance.
  • Page 2 This TV may not work correctly with CI module that is not approved by the service provider. ● Additional fees may be charged depending on the service provider. ● The compatibility with future services is not guaranteed. ● Check the latest information on the available services at the following website. (English only) http://panasonic.jp/support/global/cs/tv/...
  • Page 3: Table Of Contents

    The recording and playback of content on this or any other device may require permission from the owner of the copyright or other such rights in that content. Panasonic has Quick Start Guide no authority to and does not grant you that permission and explicitly disclaims any right, ability or intention to obtain Accessories / Options ···········································6...
  • Page 4: Safety Precautions

    Using an unapproved pedestal or other fixtures may make the TV unstable, risking injury. Be sure to ask away from this product your local Panasonic dealer to perform setup. ● Use approved pedestals (p. 8) / wall-hanging brackets at all times (p.
  • Page 5 TV off with Mains power On / Off switch, then turn it on again. ● Additional information for built-in wireless LAN and access point may be on the following website. (English only) http://panasonic.jp/support/global/cs/tv/ Bluetooth wireless technology ®...
  • Page 6: Accessories / Options

    This product contains possibly dangerous parts (such as plastic bags), that can be breathed in or swallowed by young children accidentally. Keep these parts out of reach of young children. Optional accessories Please contact your local Panasonic dealer to purchase the recommended optional accessories. For additional details, please read the manual of the optional accessories. 3D Eyewear (Rechargeable type) ●...
  • Page 7 Wall-hanging bracket ● ● ● TY-WK4P1RW (TX-P50VT50Y) TY-WK5P1RW (TX-P55VT50Y) TY-WK6P1RW (TX-P65VT50Y) a: 400 mm a: 500 mm a: 684 mm b: 300 mm b: 300 mm b: 300 mm ● ● ● Tilting angle for this TV: Tilting angle for this TV:...
  • Page 8 Do not use the pedestal if it becomes warped or physically damaged. ● If you use the pedestal while it is physically damaged, personal injury may result. Contact your local Panasonic dealer immediately. During set-up, make sure that all screws are securely tightened.
  • Page 9 4 Remove the assembly screws from the bracket. 5 Remove the assembly screws from the back of the base and pull out the neck. Adjusting the panel to your desired angle (TX-P50VT50Y) ● Do not place any objects within the full rotation range. 10°...
  • Page 10: Identifying Controls

    Identifying Controls Remote Control [Option Menu] (p. 23) ● Easy optional setting for viewing, sound, etc. Coloured buttons (red-green-yellow-blue) ● Used for the selection, navigation and operation of various functions. Sound Mute ● Switches sound mute on or off. Teletext (p.
  • Page 11 VIERA Touch Pad Controller This touch pad controller is designed for the convenient operations, especially, on VIERA Connect or internet contents. You can operate the TV intuitively with this controller. ● The touch pad controller can be used by registering to this TV with Bluetooth wireless technology. Setup screen to register will appear in “Auto Setup”...
  • Page 12 Indicator / Control panel Function select ● [Volume] / [Contrast] / [Brightness] / [Colour] / [Sharpness] / [Tint] (NTSC signal) / [Bass] ∗ / [Treble] ∗ / [Balance] / [Auto Setup] (p. 51 - 54) ∗ [Music] or [Speech] mode in the Sound Menu Channel Up / Down, Value change (when using the F button), Switching the TV on (press either button for about 1 second when in Standby mode)
  • Page 13: Basic Connection

    Basic Connection External equipment and cables shown are not supplied with this TV. Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads. There are some restrictions on placement for viewing 3D images. For details (p.
  • Page 14: Av Devices

    AV devices ■ Player / 3D compatible player Player / 3D-compatible player HDMI cable ■ DVD Recorder / VCR Terrestrial aerial DVD Recorder / VCR AV1 (SCART) adaptor ∗ Cable SCART cable RF cable RF cable ■ DVD Recorder / VCR and Set top box Cable Set top box HDMI cable...
  • Page 15 Network To enable the network service functions (VIERA Connect, etc.), you need to connect the TV to a broadband network environment. ● If you do not have any broadband network services, please consult your retailer for assistance. ● Prepare the internet environment for wired connection or wireless connection. ●...
  • Page 16: Auto Setup

    Auto Setup Search and store TV channels automatically. ● These steps are not necessary if the setup has been completed by your local dealer. ● Please complete connections (p. 13 - 15) and settings (if necessary) of the connected equipment before starting Auto Setup.
  • Page 17: Setup The Network Connection

    DVB-S Search Mode DVB-S Satellite Search DVB-S Auto Setup Search Mode Satellite Checking LNB2 Free Channels Progress 100% This will take up to 40 minutes. All Channels Satellite select Astra 19.2°E Hot Bird 13°E Press EXIT to skip Satellite installation Searching Satellite [DVB-S Auto Setup] [DVB-C Network Settings]...
  • Page 18 ■ [Wired] 1. Select [Auto] Connection Test : succeeded Check network cable connection. Acquire IP Address The test is successful Check acquired IP address. Auto Manual Check for devices using same IP address. and the TV is Check gateway connection. connected to the Check server connection.
  • Page 19 [WPS(Push button)] 1. Press the WPS button on the access point until the light flashes 2. Connect the TV with the access point WPS(Push button) 1) Please press the ‘WPS’ button on the wireless access point until its light flashes. 2) When the light is flashing select ‘Connect’...
  • Page 20: Turn Power On

    VIERA Connect is a gateway to the internet services unique to Panasonic. VIERA Connect allows you to access some specific websites supported by Panasonic, and enjoy internet contents such as videos, games, communication tools, etc. from VIERA Connect home screen.
  • Page 21: Select A Channel

    Watching TV Turn power on ● Press for about 1 second. ● Mains power On / Off switch should be on. (p. 12) ■ VIERA Connect introduction banner appears Every time you turn on the TV, this banner appears at the bottom of the screen.
  • Page 22: Other Useful Functions

    Other useful functions Display Information banner Display Information banner ● Also appears when changing a channel. Example: DVB 20:35 HDTV HDTV Coronation Street All DVB-T Channels 20:00 - 20:55 Info Change category Bad signal Bad signal Dolby D+ Dolby D+ Channel position and name Programme Start / Finish time (DVB) Channel number, etc.
  • Page 23: Off Timer

    Display the selectable settings for the current status Confirm or change the current status instantly ● To change select select / change access store [Multi Video] (DVB) [Dual Audio] (DVB) [Teletext Language] (DVB) Selects from a group of multiple Selects stereo / monaural (if Selects between alternative language videos (if available) available)
  • Page 24: Last View

    Aspect Change the aspect ratio (image size) Enjoy viewing the image at its optimum size and aspect. Programmes usually contain an “Aspect Control Signal” (Widescreen signal, etc.), and the TV will choose the aspect ratio automatically according to the “Aspect Control Signal” (p. 107). ■...
  • Page 25: Using Tv Guide

    Using TV Guide TV Guide - Electronic Programme Guide (EPG) provides an on-screen listing of the programmes currently broadcast and the forthcoming broadcasts over the next seven days (depending on the broadcasters). ● This function varies depending on the country you select (p. 16). ●...
  • Page 26 ■ ■ To the previous day (DVB) To the next day (DVB) (red) (green) ■ ■ To view a channel list of the selected type To view a channel list of the selected category (DVB) (blue) (yellow) (Category list) select category (Type list) select type Category...
  • Page 27 Timer Programming (DVB) The Timer Programming menu allows you to choose programmes that you want to remind watching or record to the external recorder, the USB HDD or the SD Card. At the correct time, the TV will tune to the correct channel even if the TV is in Standby mode.
  • Page 28: Viewing Teletext

    Viewing Teletext Teletext services are the text information provided by the broadcasters. The features may vary depending on the broadcasters. What is FLOF (FASTEXT) mode? In FLOF mode, four differently coloured subjects are situated at the bottom of the screen. To access more information about one of these subjects, press the appropriate coloured button.
  • Page 29: Store Frequently Viewed Pages

    FULL / TOP / BOTTOM (green) (TOP) (BOTTOM) Normal (FULL) (Expand the TOP half) (Expand the BOTTOM half) View in multi window Watch TV and Teletext in two windows at once Select [Picture and text] On or Off (Press twice) ●...
  • Page 30: Watching External Inputs

    Watching External Inputs Connect the external equipment (VCRs, DVD equipment, etc.) and you can watch through the input. ● To connect the equipment (p. 13 - 15, 104 - 106) The remote control is capable of operating the contents or external equipment. (p.
  • Page 31: Operating The Contents Or Equipment With The Tv Remote Control

    (p. 72) How to change the code Each type of the Panasonic equipment has its own remote control code. Change the code according to the equipment you want to operate. Press and hold Standby On / Off switch during the following operations...
  • Page 32: Viewing 3D Images

    Do not use the 3D Eyewear at a distance less than the recommended distance. The recommended viewing distance is at least 3 times of the image height. TX-P50VT50Y: 1.9 m or more TX-P55VT50Y: 2.1 m or more TX-P65VT50Y: 2.4 m or more When the top and bottom area of the screen is blackened, such as movies, view the screen at a distance at least 3 times of the height of the actual image.
  • Page 33 ● Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. 3D Eyewear ● Use the supplied 3D Eyewear or Panasonic 3D Eyewear that has this logo and supports Bluetooth wireless technology. ® “Full HD 3D Glasses™” logo indicates products that are compatible with the active shutter 3D glasses technology standards licensed by the Full HD 3D Glasses Initiative.
  • Page 34: Part Names And Functions

    Part names and functions Power switch ON / OFF ● Slide the tab to the “ON” / “OFF” position to switch the power On / Off. MODE ● Slide the tab to the “MODE” position to change the mode between 3D and 2D (view a 3D image in 2D). ●...
  • Page 35: Replacing The Battery

    ■ Registration again When connection with registered TV fails, or when using with another TV, re-register the 3D Eyewear. Turn the TV on Within 50 cm from the TV, hold the power switch on the “MODE” position for more than 2 seconds ●...
  • Page 36: View The 3D Images

    3D-supported broadcast ● Please consult the suppliers of contents or programmes for availability of this service. ■ 3D photos and 3D videos taken by 3D-compatible Panasonic products ● Available in Media Player (p. 74) and Network services (p. 92) ■...
  • Page 37 ■ To change 3D format manually When the image is not changed properly using [3D], [2D] or [2D 3D] mode, use this manual setting. During the above operation Select the mode select 3D Mode Selection (Manual) (red) Original Frame Sequential - 3D Frame Sequential - 2D Side by Side - 3D Side by Side - 2D...
  • Page 38 3D Settings If the 3D images are not displayed correctly or seem unusual, adjust and setup the 3D settings. Display the menu Select [Picture] select Picture access Select [3D Settings] select P-NR access Picture in Picture 3D Settings Access Screen Display Advanced Settings Reset to Defaults Select one of the following functions and set...
  • Page 39: How To Use Viera Tools

    How to Use VIERA TOOLS You can access some special features easily by using the VIERA TOOLS function. Display icons of the feature Select a feature select access VIERA Link ■ To return to TV ■ Follow the operations of each feature [Music] ∗...
  • Page 40: How To Use Menu Functions

    How to Use Menu Functions Various menus allow you to make settings for the picture, sound, and other functions. Display the menu ● Displays the functions that can be set (varies according to the input signal). Select the menu select Main Menu access Picture...
  • Page 41: Menu List

    Menu list Menu Item Adjustments / Configurations (alternatives) Selects your favourite picture mode for each input [Dynamic] / [Normal] / [Cinema] / [THX Cinema] / [THX Bright Room] / [Game] / [Professional1] / [Professional2] [Dynamic]: Improves contrast and sharpness for viewing in a bright room. [Normal]: Normal use for viewing in a normal lighting condition.
  • Page 42 Menu Item Adjustments / Configurations (alternatives) Automatic Brightness Control function Eco Mode Adjusts picture settings automatically depending on ambient lighting conditions [Off] / [On] Picture Noise Reduction Reduces unwanted picture noise and flicker noise in the contoured parts of a P-NR picture [Off] / [Min] / [Mid] / [Max] / [Auto] ●...
  • Page 43 Menu Item Adjustments / Configurations (alternatives) Selects the screen area displaying the image [Off] / [On] [On]: Enlarges the image to hide the edge of the image. [Off]: Displays the image in the original size. 16:9 Overscan ● Set to [On] if noise is generated on the edge of the screen. ●...
  • Page 44 Menu Item Adjustments / Configurations (alternatives) Adjusts the frequency level to suit your favourite sound quality ● This function is available when [Mode] is set to [User]. ● Select the frequency and change the frequency level by using the cursor button. Equaliser ●...
  • Page 45 Sets to control the TV with the devices connected to the network (p. 88) Software Update Checks for available software updates from the Panasonic website Selects whether to give a notification message when new software is found via New Software Message...
  • Page 46 Menu Item Adjustments / Configurations (alternatives) Automatically sets the TV to the most suitable energy-saving mode ● If you press the OK button, the following items are set as below: [Eco Mode], [VIERA Link], [Power off Link], [Standby Power Save], Eco Navigation [Power Save] [On]...
  • Page 47 Menu Item Adjustments / Configurations (alternatives) Child Lock Applies access control for channels or inputs to prevent unwanted access (p. 62) Creates a list of favourite channels (p. 55) Favourites Edit ● Not valid on Analogue mode Channel List Skips the unwanted channels or edits channels (p. 56) Auto Setup Automatically searches for the receivable channels (p.
  • Page 48 Menu Item Adjustments / Configurations (alternatives) OSD Language Changes language for on-screen displays Preferred Audio Selects the first and second preferred language for DVB multi audio (depending 1 / 2 on the broadcaster) Selects the first and second preferred language for DVB subtitles (depending on Preferred Subtitles the broadcaster) 1 / 2...
  • Page 49 Menu Item Adjustments / Configurations (alternatives) Sets to use Hybrid Broadcast Broadband TV application (depending on the Data Service selected country and broadcaster) [Off] / [Auto Start Off] / [Auto Start On] Application (p. 63) ● For DVB mode Sets the timer for turning off the screen automatically when a radio channel is selected [Off] / [5] / [10] / [15] / [20] (seconds) ●...
  • Page 50 Menu Item Adjustments / Configurations (alternatives) Automatically selects the input when the TV is turned on [TV] / [AV] ● Set to [TV] to view picture from TV tuner. Set to [AV] to view input from the Power on external equipment connected to the AV1 or HDMI1 terminal, e.g. set top box. Preference ●...
  • Page 51: Retuning From Setup Menu

    Retuning from Setup Menu Automatically retune the channels received in the area. ● This function is available if channel tuning is already performed. ● Only the selected mode is retuned. All the previous tuning settings are erased. ● If Child Lock PIN number (p. 62) has been set, the PIN number is required. ●...
  • Page 52 [LNB]: ● If you set to [One LNB], [LNB] is not selectable. ● If you set to [MiniDiSEqC] or [Single Cable], select from LNB AA and AB. ● If you set to [DiSEqC 1.0], select from LNB AA, AB, BA and BB. [Satellite]: ●...
  • Page 53: Tuning Menu

    DVB-C, DVB-T, Analogue channels Select DVB-C, DVB-T or Analogue (p. 21) Display the menu and select [Setup] select Setup access Select [DVB-C Tuning Menu], [DVB-T Tuning Menu] or [Analogue Tuning Menu] select access DVB-C Tuning Menu Access DVB-T Tuning Menu Access Analogue Tuning Menu Access...
  • Page 54 DVB-T: DVB-T Auto Setup DVB-T Auto Setup Progress CH 5 All DVB-T tuning data will be erased This will take about 3 minutes. Channel Name Type Quality CBBC Channel Free TV BBC Radio Wales Free TV Free TV Cartoon Nwk Free TV Free TV: 4 Pay TV: 0...
  • Page 55: Tuning And Editing Channels

    Tuning and Editing Channels You can retune channels or make your favourite channel lists, skip unwanted channels, etc. Select the mode (p. 21) Display the menu and select [Setup] select Setup access Select [DVB-S Tuning Menu], [DVB-C Tuning Menu], [DVB-T Tuning Menu] or [Analogue Tuning Menu] select access...
  • Page 56 ■ To edit Favourites list While the cursor is in the Favourites field to edit ● ● To move the channel To delete the channel Select the new position Store (green) (green) ● To delete all channels (yellow) ● To name the Favourites Set characters (maximum 10 characters) Store select...
  • Page 57: Set Dvb Channel Manually [Manual Tuning

    Set DVB channel manually [Manual Tuning] Normally use [Auto Setup] or [Update Channel List] to retune DVB channels. If tuning has not been done completely or for adjusting the direction of the aerial or dish, use this function. ● All channels found will be added to the Channel List. DVB-S: Set the satellite DVB-S Manual Tuning...
  • Page 58: Check Dvb Signal [Signal Condition

    Update DVB channel automatically [Update Channel List] You can add new channels, delete removed channels, update channel name and position automatically to the channel list. ● The channel list is updated while keeping your settings in [Favourites Edit], DVB-T Update Channel List Progress CH 5 [Channel List], [Child Lock], etc.
  • Page 59: Timer Programming

    Timer Programming Timer Programming from Menu The Timer Programming menu allows you to choose programmes that you want to remind watching or record to the external recorder, the USB HDD or the SD Card. At the correct time, the TV will tune to the correct channel even if the TV is in Standby mode.
  • Page 60: Set Timer Programming Event Details

    Set timer programming event details Start making the settings Select the function ([Ext Rec.], [USB HDD Rec.], [SD Card Rec.] or [Reminder]) [Ext Rec.] / [USB HDD Rec.] / [SD Card Rec.]: Records the programme to the external recorder, the USB HDD or the SD Card. When the start time comes, the channel will be switched automatically and the video and audio signals will be output.
  • Page 61 ■ To edit a timer programming event Select the event ● To change a timer programming event ● To record with subtitles (if available) Each time pressed: • (yellow) auto Correct as necessary (p. 60) ● To cancel a timer programming event temporarily ●...
  • Page 62: Child Lock

    Child Lock You can lock specific channels / AV input terminals and control who watches them. When the locked channel / input is selected, a message appears. Enter the PIN number to watch. Display the menu and select [Setup] select Setup access Select [Child Lock]...
  • Page 63: Using Data Service Application

    Using Data Service Application You can enjoy Hybrid Broadcast Broadband TV application that is one of the interactive data services for digital broadcasting. ● To use Hybrid Broadcast Broadband TV application fully, you need a broadband network environment. Ensure the network connections and network settings are completed. “Network connections”...
  • Page 64: Using Common Interface

    Although CI module may enable you to view some services, this TV does not guarantee all services (e.g. encrypted pay-TV channels). Please use only the approved CI module by the broadcaster. Consult your local Panasonic dealer or broadcasters for more information and conditions of the services. CI slot Caution ●...
  • Page 65: Shipping Condition

    Shipping Condition Resets the TV to its original condition, i.e. no channels tuned in. All settings other than [USB HDD Setup] are reset (channels, picture, sound settings, etc.). ● To retune TV channels only, e.g. after moving house “Retuning from Setup Menu” (p. 51 - 54) Display the menu and select [Setup] select Setup...
  • Page 66: Updating The Tv Software

    Updating the TV Software A new version of software may be released for download to enhance the performance or operations of the TV. If there is an update available, a notification message is displayed when the channel has the update information. ●...
  • Page 67: Multi Window

    Multi Window Enjoy viewing the digital TV programme and external input (AV, Component or HDMI) at once. Display the menu and select [Picture] select Picture access Select [Picture in Picture] select access Picture in Picture Access ● Remote control operations apply to the main screen. 1 DVB-T Main screen Sub screen...
  • Page 68: Advanced Picture Settings

    Advanced Picture Settings You can adjust and setup the detailed picture settings for each input and Viewing Mode (except THX modes). ● To use this function completely, set [Advance(isfccc)] to [On] in the Setup Menu. (p. 49) Select the input mode to adjust and setup (p.
  • Page 69 Menu Item Adjustments / Configurations (alternatives) R-Hue, G-Hue, B-Hue Adjusts the picture hue of red / green / blue area R-Saturation, G-Saturation, Adjusts the saturation of red / green / blue area B-Saturation R-Luminance, G-Luminance, Adjusts the luminance of red / green / blue area B-Luminance Adjusts more detailed Colour Management items [Y-Hue] / [C-Hue] / [M-Hue]:...
  • Page 70: Usb Hdd / Sd Card Recording

    USB HDD / SD Card Recording You can record the digital TV programmes to the connected USB HDD or inserted SD Card and enjoy playing back in various ways. ● Analogue TV programme cannot be recorded on the USB HDD / SD Card. ●...
  • Page 71 Setting for USB HDD / SD Card Format and setup the USB HDD with this TV in order to use it for recording. Depending on the conditions of the SD Card, the recording may not work properly. Formatting the SD Card with this TV will resolve this problem.
  • Page 72 Mode USB HDD Setup Product Name : The USB HDD is available for recording / playing back. USB Drive A USB HDD 1 USB Flash Disk Only one USB HDD on the list is available for recording. USB HDD name is displayed : The USB HDD is available for playing back.
  • Page 73 ■ To stop recording on the way ■ To play back or delete the recorded contents “Recorded TV mode” (p. 81) ● Even if One Touch Recording is in progress, you can play back all the contents. (Depending on the USB HDD / SD Card, it may not be available or the recording may not work properly while playback.) Record constantly [REW LIVE TV] (USB HDD only)
  • Page 74: Using Media Player

    Using Media Player Media Player allows you to enjoy photo, video or music recorded on an SD Card and a USB Flash Memory, and contents recorded with this TV on the recording devices (SD Card / exclusive USB HDD). Photo mode: Still pictures recorded by digital cameras will be displayed.
  • Page 75 Starting Media Player Insert the SD Card or USB Flash Memory to the TV (p. 74) ● To play back contents in the USB HDD, check the connection and settings are completed. (p. 70, 71) Confirm the message and start Media Player ●...
  • Page 76: Change The Contents

    Change the contents You can switch to the other mode of Media Player from the thumbnail view. ● The mode can be switched in the current device. While the thumbnail is displayed, Select the content display the contents selection Contents Select select EXIT (blue)
  • Page 77: Multi Shot 3D

    ■ To sort by folder, recorded date or recorded month Display the view selection in the thumbnail view (green) Select the sort type [Folder view]: select Displays the thumbnail grouped by folder. access ● The files which are not into a folder will be collected to the folder named “/”. [Sort by Date] / [Sort by Month]: Displays the thumbnail grouped by the same date or month.
  • Page 78: Photo Settings

    ■ To enjoy the saved 3D photos Saved 3D photos are displayed in the Thumbnail screen. Wear the 3D Eyewear and enjoy the 3D photos. Example: Thumbnail Media Player Photo All photos Saved 3D photo Photo Settings Setup the settings for Photo mode. Display the option menu Select [Slideshow Settings] Select the items and set...
  • Page 79 Menu Item Adjustments / Configurations (alternatives) Selects enlarged or normal viewing on Single view and Slideshow [Normal] / [Zoom] ● This function is not available when [Frame] is set to [Collage], [Drift], [Gallery] or Screen Mode [Cinema] or when [Transition Effect] is set to [Motion]. ●...
  • Page 80: Video Mode

    Video and Recorded TV mode ● Supported file format (p. 108, 109) Video mode (For SD Card / USB Flash Memory) The thumbnail of video titles in the SD Card or USB Flash Memory will be displayed. Example: Thumbnail - [Title view] The preview will start when the title / scene is highlighted if it supports Media Player Video...
  • Page 81: Video Setup

    ■ Video Setup Setup the settings for Video mode. ● Menu items and selectable options vary depending on the content. Display the option menu Select [Video Setup] Select the items and set select Option Menu Video Setup access / store Menu Item Adjustments / Configurations (alternatives)
  • Page 82 ■ Playback from the list Select the content Start playback ● If you stopped the last playback on the way, the confirmation screen is displayed to select whether to start from where you stopped last time or from the beginning. (USB HDD only) ●...
  • Page 83: Audio Output Settings

    ● ● To repeat between the starting point “A” and finishing To the previous / next chapter point “B” (red) / (green) Set “A” and “B” in order A recorded content is automatically divided into • The points will be reset by •...
  • Page 84: Music Setup

    Music mode ● Supported file format (p. 109) The thumbnail of music folders in the SD Card or USB Flash Memory will be displayed. Example: Thumbnail - [Folder view] ● To play back the selected folder Media Player Music Folder view Select the folder Start playback My Music_1...
  • Page 85: Using Network Services

    To use this function with your smartphone, set [Network Remote Control] of this TV to [On]. (p. 88) And you need to install the application for controlling VIERA in your smartphone. For the information of the application (English only): http://panasonic.jp/support/global/cs/tv/ For the operations, refer to the support information of the application.
  • Page 86 VIERA Connect is a gateway to the internet services unique to Panasonic. VIERA Connect allows you to access some specific websites supported by Panasonic, and enjoy internet contents such as videos, games, communication tools, etc. from VIERA Connect home screen.
  • Page 87 Network connections To use only DLNA features, you need a home network environment and you can operate the features without broadband network environment. To use VIERA Connect features, you need a broadband network environment. ● If you do not have any broadband network services, please consult your retailer for assistance. ●...
  • Page 88: Network Link Settings

    [Manual]: Sets the restrictions for each equipment in the [Remote Device List]. Remote Device List Lists the accessible equipment to this TV on the home network ∗ Depending on the area, this function may not be available. For details, consult your local Panasonic dealer.
  • Page 89: Wired Connection Settings

    Wired connection settings This setting is for the network connection by using the LAN cable. Select [Network Connection] and set to [Wired] select Connection Test access / store Network Connection Wired Wireless Network Settings IP/DNS Settings Network Link Settings Software Update New Software Message Network Status Select [IP/DNS Settings] and set the items...
  • Page 90: Wireless Connection Settings

    Select [Connection Test] and access to test select Connection Test Access access ● Performs automatic testing of the network connection for the TV. (It takes a while to test.) Connection Test : succeeded Check network cable connection. The test is successful and the TV is connected to the network. Check acquired IP address.
  • Page 91: Update Tv's Software

    Enter the encryption key of the access point Set characters Store Wireless Network Settings Encryption key select A B C D E F G H J K L M N O P Q R S T U V W X Y Z v w x _ @ / “...
  • Page 92 Using DLNA features ® ● Ensure the preparation of the media server, network connections and network settings are completed. (p. 85 - 91) Display [VIERA TOOLS] and select [Media Server] select access Media Server Select one of the media servers to access Example: Media server list Media Server select...
  • Page 93 [Slideshow] - Slideshow completes when all photos are viewed within the list. Select the photo file from the list for the first view Start Slideshow (red) ● ● ● To display / hide the operation guide To pause (return to Single view) To return to list For video file Playback...
  • Page 94: Option Menu For Each Content

    Option menu for each content Setup the settings for Photo, Video and Music file operations on this TV. Display the Select [Slideshow Settings], [Video Setup] Select the items and set option menu or [Music Setup] select Option Menu access / store Slideshow Settings Video Setup Music Setup...
  • Page 95: Audio Output Settings (For Video Contents)

    Audio output settings (for video contents) You can enjoy the multi-channel sound via an amplifier connected to DIGITAL AUDIO OUT or HDMI2 (ARC function) terminal. ● To confirm or change the current sound status (p. 94) Display the menu and Select [Sound] Select [SPDIF Selection] and set Sound SPDIF Selection...
  • Page 96: Link Functions (Q-Link / Viera Link)

    Use fully wired HDMI compliant cable. ● Connect the equipment supporting VIERA Link to the TV’s HDMI1, HDMI2, HDMI3 or HDMI4 terminal via an HDMI cable. ● About HDMI cable for connecting Panasonic HD Video Camera or LUMIX Camera, read the manual of the equipment.
  • Page 97: Viera Link (Hdmi And Audio Out Connections)

    VIERA Link (HDMI and Audio out connections) Connected equipment Blu-ray Disc theatre Player theatre with Amplifier with with VIERA Link VIERA Link function VIERA Link function Features function Preset download – – – ∗ ∗ Easy playback – Power on link –...
  • Page 98: Power Off Link

    Q-Link Preparations ● Connect the DVD Recorder / VCR with the following logos: “Q-Link”, “NEXTVIEWLINK”, “DATA LOGIC (a trademark of Metz Corporation)”, “Easy Link (a trademark of Philips Corporation)”, “Megalogic (a trademark of Grundig Corporation)”, “SMARTLINK (a trademark of Sony Corporation)” ●...
  • Page 99: Easy Playback

    ” ∗ VIERA Link “ ∗ Enjoy additional HDMI Inter-Operability with Panasonic products which have “HDAVI Control” function. This TV supports “HDAVI Control 5” function. Connections to the equipment (DIGA Recorder, HD Video Camera, Player theatre, Amplifier, etc.) with HDMI and SCART cables allow you to interface them automatically (p.
  • Page 100 Reduce unnecessary power consumption in Standby [Standby Power Save] Set Standby Power Save [On] in the Setup Menu to use this function [Standby Power Save] (p. 46) The power consumption in Standby mode of the connected equipment is controlled higher or lower in synchronisation with the TV on / off state to reduce the consumption.
  • Page 101 Pause Live TV programme [Pause Live TV] You can pause the current TV programme and resume later. The current TV programme will be recorded on HDD of the connected DIGA Recorder. ● This function is available with a DIGA Recorder which has HDD. ●...
  • Page 102: Operate The Menu Of The Equipment

    Select [VIERA Link Control] select VIERA Link Menu Start Pause Live TV access Direct TV Rec Start VIERA Link Control Recorder Speaker Selection Home Cinema Select the equipment to access Select the type of the connected equipment and access. select VIERA Link Menu Pause Live TV Start...
  • Page 103 Speaker control [Speaker Selection] You can control the theatre speaker with this TV remote control pointing at the TV’s signal receiver. ● If you cannot operate, check the settings and the equipment. “Summary of Q-Link and VIERA Link features” (p. 96, 97), “Preparations” (p. 99) Display [VIERA TOOLS] and select [VIERA Link] select access...
  • Page 104: External Equipment

    External Equipment These diagrams show our recommendations for connection of your TV to various pieces of equipment. For other connections, consult the instructions for each piece of equipment, the basic connection (p. 13 - 15), the table (p. 106), and the specifications (p. 121 - 123). ●...
  • Page 105 To listen with speakers Optical digital audio cable Amplifier with speaker system To enjoy the sound from the external equipment in multi-channel sound (e.g. Dolby Digital 5.1ch), connect the equipment to the amplifier. For the connections, read the manuals of the equipment and amplifier.
  • Page 106 Types of connectable equipment to each terminal Terminal AV2 ∗ Features To record / playback videocassettes / DVDs (VCR / DVD Recorder) To watch 3D contents (Blu-ray Disc Player) ∗ To watch cable broadcasts (Set top box) To watch DVDs (DVD Player) To watch camcorder images (Video camera) To play games (Game equipment) ∗...
  • Page 107: Technical Information

    Technical Information Auto Aspect The optimum size and aspect can be chosen automatically, and you can enjoy finer images. (p. 24) ■ Aspect Control Signal [WIDE] will appear in the top left of the screen if a Widescreen signal (WSS) or a Control signal through SCART / HDMI terminal is found.
  • Page 108 MPEG2 MPEG Audio structure on the device is modified. ● This TV supports Motion JPEG DivX3 DivX4 Dolby Digital recorded by Panasonic LUMIX Camera ∗ DivX5 DivX6 Dolby Digital ● This TV is not available for playing back Plus H.264 BP/MP/HP .mov...
  • Page 109 Dolby Digital DivX5 DivX6 .f4v Dolby Digital ● This TV supports this container H.264 BP/MP/HP Plus .m4v recorded by Panasonic products. For MPEG1 details, read the manual of the products. HE-AAC .mp4 MPEG2 MPEG Audio MPEG4 SP/ASP .flv H.264 –...
  • Page 110 DivX DivX Certified to play DivX and DivX Plus HD (H.264/MKV) video up to 1080p HD including premium content. ® ® ® ABOUT DIVX VIDEO: DivX is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified ®...
  • Page 111 Back up the recorded data at regular intervals in case of deteriorated or damaged data or erratic operation of the TV. Panasonic is not liable for any deterioration or damage of recorded data. Recording time for the USB HDD / SD Card Recording...
  • Page 112: Dvi Connection

    HDMI connection HDMI (high-definition multimedia interface) is the world’s first complete digital consumer AV interface complying with a non-compression standard. HDMI allows you to enjoy high-definition digital images and high-quality sound by connecting the TV and the equipment. HDMI-compatible equipment ∗ with an HDMI or DVI output terminal, such as a DVD player, a set top box or game equipment, can be connected to the HDMI terminal using an HDMI compliant (fully wired) cable.
  • Page 113 You cannot use two or more same kind of USB devices simultaneously except USB Flash Memory or USB HDD. ● Additional information for the devices may be on the following website. (English only) http://panasonic.jp/support/global/cs/tv/ Bluetooth Setup You can use Bluetooth keyboards ∗...
  • Page 114 ■ USB Gamepad ● Check the gamepads that have been tested for the performance with this TV at the following website. (English only) http://panasonic.jp/support/global/cs/tv/ ● Some of the keys of gamepads correspond to the operation of the remote control. Example:...
  • Page 115 Input signal that can be displayed ■ COMPONENT (Y, P ) (from AV2 terminal), HDMI Signal name COMPONENT HDMI 525 (480) / 60i, 60p 625 (576) / 50i, 50p 750 (720) / 60p, 50p 1,125 (1,080) / 60i, 50i 1,125 (1,080) / 60p, 50p, 24p : Applicable input signal ■...
  • Page 116 Before requesting service or assistance, please follow these simple guides to resolve the problem. If the problem still persists, please contact your local Panasonic dealer for assistance. Block noise, frozen or disappearing image occurs in DVB mode / White spots or shadow image (ghosting) occurs in Analogue mode / Some channels cannot be tuned ●...
  • Page 117 Problem Causes / Actions ● Set [P-NR] in the Picture Menu to remove noise. (p. 42) Chaotic image, noisy ● Check nearby electrical products (car, motorcycle, fluorescent lamp). ● Is [Contrast], [Brightness] or [Colour] in the Picture Menu set to the minimum? No image can be (p.
  • Page 118 TV off with Mains power On / Off switch, then turn it on again. message appears ● Check foreign objects are not inside the USB port. ● Follow the message’s instructions. An error message appears ● If the problem persists, contact your local Panasonic dealer or the authorised service centre.
  • Page 119 Maintenance First, remove the mains plug from the socket outlet. Display panel, Cabinet, Pedestal Regular care: Gently wipe the surface of the display panel, cabinet, or pedestal by using a soft cloth to clean the dirt or fingerprints. For stubborn dirt: First clean the dust on the surface.
  • Page 120 The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such ® marks by Panasonic Corporation is under license. Other trademarks and trade names are those of their respective owners. ● SDXC Logo is a trademark of SD-3C, LLC.
  • Page 121: Specifications

    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. At least three (3) years from delivery of products, Panasonic will give to any third party who contact us at the contact information provided below, for a charge no more than our cost of physically performing source code distribution, a complete machine-readable copy of the corresponding source code covered under LGPL.
  • Page 122: Other Information

    ■ Other information Model No. TX-P50VT50Y TX-P55VT50Y TX-P65VT50Y Power source AC 220-240 V, 50 / 60 Hz Panel Plasma panel 1,171 mm × 754 mm × 1,286 mm × 819 mm × 1,499 mm × 939 mm × 335 mm (With Pedestal)
  • Page 123 Usage temperature range 0 °C - 40 °C Coin-shaped lithium battery CR2025 Battery Operation time: Approx. 75 hours in continuous use of the battery made by Panasonic Viewing range Within 3.2 m from front surface of the TV Main body: Resin Materials...
  • Page 124 Warranty Service purposes. Model Number Serial Number M0312-0 Web Site: http://panasonic.net © Panasonic Corporation 2012 Printed in Czech Republic...

Table of Contents