LG REFRIGERATOR- FREEZER Owner's Manual page 27

Filling of PET Bottle (Optional)
When using the water bottle, you can connect the
cap assembly tank to the general water bottle to
use the water bottle, instead of the water tank
provided.
1.
Turn the cap assembly
tank in open direction to
separate from cap tank.
Open the water bottle
and insert the tube into
the water bottle.
2.
Assembly water bottle by the
cap assembly tank (Height of
water bottle_ Below 350 mm,
Beyond 300 mm). Please
relocate the tilting basket.
There are some types that are
not compatible.
3.
Assembly the water bottle on the door.
CAUTION
w w
• Please use bottled water currently circulated.
- If you fill soft drinks, milk and fruit juices or
ground water(included Ca, Mg, Si etc..) or no
filtered water, it may cause malfunctioning.
• When you fill water tank with water, please let
hot water cool before putting water tank in
refrigerator.
- Hot water cause malfunctioning.
• When you install water tank in refrigerator,
cap should fit into (plug) housing and safety
knob has to be pointed to "close".
- When water tank is not
correctly inserted,
dispenser might not work
or water tank might fall
off on the floor.
• If you want to take out water tank for re-
dispensing or cleaning, you should grab and
pull the upper part of the water tank and have
safety knob pointed to "open".
Close
Close Open
Close Open
Drinking
1.
Press the dispenser pad with a cup.
2.
If pressing the pad, water inside of the
dispenser is supplied.
3.
If slowly removing a cup from the pad, water
will not fall down.
4.
Some noise after dispensing is the sound to
absorb water remained in the tube, which is for
the purpose of sanitation.
CAUTION
w w
Do not use other beverage (milk, juice,
carbonated beverage etc) than potable water.
Especially beverage including grain must not be
used (may result in failure).
WARNING
w w
Fill with the potable water only.
Pump can generate some noise, while the cool
water is taken from the tank (e.g. Bottle, water tank).
27
Operation