Adjusting Tuner Settings - LG LCS110AR Owner's Manual

16 Operating

Adjusting TUNER settings

On the unit
1. Press FUNC.
2. Rotate the volume knob to select an item and
press it.
3. Rotate the volume knob to set the option and
press it.
4. If you want to return to the previous step, press
.
On the Remote Control
1. Press FUNC/ • MENU.
2. Press w / s to select an item and press ENTER.
3. Press w / s to set the option and press ENTER.
4. If you want to return to the previous step, press
.
 A/S (Auto Store)
3
The six strongest broadcasting frequencies will
be stored under preset button 1 - 6 in the order
of their signal strength. To cancel, press the
volume knob (or ENTER on the remore control).
 P/S (Preset scan)
Each preset station appears. To cancel, press the
volume knob (or ENTER on the remore control).
 SENS (Tuner sensitivity) MID/ HI/ LOW
In an area in which signal reception is weak, it
helps the tuner to search more stations. The
weaker the reception is, the lower option you
should set to.
RDS (OPTIONAL)
 PTY (Program type)
It searches the radio stations by program type of
FM tuner.
The program types are displayed as follows.
NEWS
AFFAIRS
INFO
SPORT
EDUCATE
DRAMA
CULTURE
SCIENCE
VARIED
WEATHER
FINANCE EASY M
CHILDREN LIGHT M
SOCIAL CLASSICS
RELIGION OTHER M
PHONE IN JAZZ
TRAVEL COUNTRY
LEISURE NATION M
DOCUMENT OLDIES
POP M FOLK M
ROCK M
 AF (Alternative frequency) ON/ OFF
When the reception quality drops, the tuner
automatically changes to another station in the
network, broadcasting a better reception quality,
using the PI and AF codes.
 REG (Region) ON/ OFF
REG ON: The unit switches to another station,
within the same network, broadcasting the same
program when the receiving signals from the
current station become weak.
REG OFF: The unit switches to another station,
within the same network when the receiving
signals from the current station become weak.
( In this mode, the program may diff er from the
one currently received.)
 TA (Traffi c Announcement) ALARM/ SEEK
TA ALARM: When the tuned station has no TP
information for 5 seconds, a double beep sound
is output.
TA SEEK: When the tuned station does not
receive TP information for 5 seconds, the receiver
retunes to the next station that has the TP
information.
 PI (Programme Identifi cation) SOUND/ MUTE
PI SOUND: When the frequency of a tuned
station switches to an AF (Alternative frequency)
with an unidentifi ed PI, it keeps the sound.
PI MUTE: When the frequency of a tuned station
switches to an AF with an unidentifi ed PI, it
mutes the sound until the PI is identifi ed.
 CT (Clock Time) ON/ OFF
You can use the RDS CT information to update
the time. When RDS CT information is not
received and then you set CT to OFF, you can
adjust the time by yourself. Refer to the page 12
for setting the clock.