Listening To A Cd; Pausing Or Restarting Cd Playback; Searching For A Section Within A Track - LG LCS110AR Owner's Manual

12 Operating
For [OTHER] setting
 AUX (Auxiliary) ON/ OFF
It is possible to use auxiliary equipment with this
unit. Activate the auxiliary setting when using
auxiliary equipment connected to this unit.
 BEEP 2ND/ ALL
BEEP 2ND: The beep is generated when a key is
pressed for longer than 2 seconds.
BEEP ALL: The beep is generated when any key is
pressed.
 A-EQ (Auto EQ) ON/ OFF
AUTO EQ operates only in the music fi le
supported with genre in the device. When you
set AUTO EQ to ON, POP, CLASSIC, ROCK, or JAZZ
is automatically selected according to the music
genre.
 SW (Subwoofer) OFF/ SW 55 Hz/ SW 85 Hz/ SW
120 Hz
You can enable the subwoofer.
SW OFF <-> SW 55 Hz <-> SW 85 Hz <-> SW 120
3
Hz.
 DEMO OFF/ ON
You can change the initial indication on the
display to information name (function name, EQ
name, etc...) while listening to a source.
 CLK (Clock)
For the model RDS is not supported unit or even
for a RDS supported unit.
- When RDS CT information is not received and
then you set CT to OFF, you can adjust the time
by yourself. Set the clock as follows ;
1. Select a source to TUNER.
2. Set CT to OFF.
( Refer to the " Adjusting TUNER settings " on
the pages 16
ON/ OFF.)
3. Press ` on the unit to select [OTHER] and
then select CLK by rotating the volume
knob.
4. Set the hour by rotating the volume knob.
5. Press the volume knob to confi rm the hour.
6. Set the minute by rotating the volume knob.
7. Press the volume knob to confi rm the
minute.
- When RDS CT information is received ;
The clock is displayed according to the RDS CT
information.
- When RDS is not supported, set the clock
according to 3-4 steps.
for setting the CT (Clock Time)

Listening to a CD

1. Insert a CD.
2. Rotate the volume knob on the unit to adjust
the volume.
Or press VOLUME W/S on the remote control.
Pausing or restarting CD
playback
1. Press N on the unit to pause playback.
Or press N on the remote control.
2. Press it to resume playback.
Searching for a section within
a track/ fi le
1. Press and hold /
second during playback.
Or press and hold c / v on remote
control.
2. Press N on the unit at the point you want.
Or press N on the remote control.
on the unit for about 1