Level Adjustment - LG WD-10264S Owner's Manual

I nstallation
I Level adjustment
Lock nut
Adjustable feet
Higher
Lower
Adjustable feet Adjustable feet
I Concrete floors
I Tile floors (Slippery floors)
Tread Mate is a self adhesive material used on ladders & steps that prevents slipping.
I Wooden floors (Suspended floors)
Insert the rubber cups to reduce vibration.
You can obtain the rubber cups (p/no.4620ER4002B) from the LG spares dept.
Important!
10
1.
Timber or suspended type flooring may contribute to
NOTE
excessive vibration and unblance errors.
2.
After the washer is level, tighten the lock nuts up towards of the base of
the washer. All lock nuts must be tightened.
In the case that the washing machine is installed on a
NOTE
raised platform, it must be securely fastened in order
to eliminate the risk that it might fall off.
❊ Diagonal Check
When pushing down the edges of the washing machine top plate diagonally, the machine
should not move up and down at all. (Please, check both of two directions)
If machine rocks when pushing the machine top plate diagonally, adjust the feet again.
Rubber Cap