Installation; Basic Installation; Removing The Existing Receiver Unit; Iso-Din Installation - LG LAC2900N Owner's Manual

Installation

Basic Installation

Before installing, make sure that the
Bend the claws
ignition-switch is set to OFF and
according to
the thickness
remove the terminal of the car battery
of the
to avoid short-circuiting.
dashboard
1
2
3
4
Control panel

Removing the existing receiver unit

If there is already an installation
sleeve for the receiver unit in the
A
dashboard, it must be removed.
1
2
A
3
6 CAR CD/MP3/WMA Receiver
Remove the existing receiver unit.
Make the necessary connections.
Install the installation sleeve.
Install the unit into the installation
sleeve.
Remove the rear support from the
unit.
Remove the control panel and trim
ring from the unit.
Insert the lever A into the hole on
one side of the unit.
Perform the same operation on
the other side and pull the unit out
from the mounting sleeve.

ISO-DIN Installation

1
2
1
3
4
3
5
4
2
6
5
6
Control panel
Slide the unit into the ISO-DIN
frame.
Fit screws removed from the old
unit.
Slide the unit and frame into the
dash opening.
Install the dash panel or adapter
plate.
Install the trim ring to the unit.
Install the control panel to the unit.