Radio Operation - LG LAC5710R Owner's Manual

1 Press SOURCE to select the AUX as source.
AUX IN appears in the display.
2 Turn on the connected Auxiliary Equipment and start playing the source.
3 Adjust the volume.
Note
• Before operating the Auxiliary Equipment using the following procedure, select the external
input correctly. (Refer to the page 10 for details.)
• If the input level of the Auxiliary Equipment connected to the AUX input jack is not high
enough, adjust the input level properly. (Refer to the page 10 for details.)

Radio operation

Listening to radio stations
1 Press SOURCE to select the tuner.
2 Press the BAND repeatedly to select a band.
The indicator lights up in the following order. FM1 t FM2 t FM3 t MW(AM)
3 Auto Seek : Press I I
When a station is received, searching stops.
Manual Seek : Press and hold I I
AL" appears, and then press it repeatedly.
The frequencies move up or down step by step.
Storing and recalling broadcast frequencies
You can easily store up to 6 broadcast frequencies for later recall at the touch of a button.
1 Press BAND to select desired band you want to store.
2 Select the desired frequency.
3 Press one of preset buttons 1-6 and hold until the beep sound.
The number you have pressed will flash in the preset number indicator and then remain
lit. The selected radio station frequency has been stored in memory.
4 Repeat steps 1 - 3 to preset other stations.
The next time, you press the same preset button, the radio station frequency is
recalled from the memory.
Note
• Up to 18 FM stations, 6 for each of three FM bands and 6 MW(AM) stations can be stored
in the memory.
• When a station is stored on the preset numbers on which another station of the same band
has already been preset, the previously preset station is automatically erased.
Auto search memory
This function lets you automatically store the 6 strongest broadcast frequencies.
1 Press U U /AS until "AUTO STORE" appears.
The six strongest broadcast frequencies will be stored under preset button 1~6 in the
order of their signal strength.
2 To cancel, press U U /AS.
To scan the preset stations
Press u u /PS. Each preset station appears. To cancel, press u u /PS.
To tune in the preset stations
Press BAND to select the desired band and press the desired preset button 1~6.
The preset station of the preset button 1~6 is displayed and the preset station is received.
i i ( on the remote control).
/ ?m m/M M?
i i (
/ ?m m/M M?
12
on the remote control) until "MANU-