LG LAC4710R Owner's Manual page 10

PI (Programme Identification) SOUND / MUTE
PI SOUND :
If the sound of a station with different PI is heard intermittently, the receiver mutes the
sound after 1 second.
PI MUTE :
If the sound of a station with different PI is heard intermittently, the receiver mutes the
sound right now.
AUX (Auxiliary) ON / OFF
It is possible to use auxiliary equipment with this unit. Activate the auxiliary setting when
using auxiliary equipment connected to this unit.
AUX ON
When using a auxiliary equipment.
AUX OFF
When not using a auxiliary equipment.
AUX (Auxiliary) 00DB / +6DB
You can adjust the volume level of each source to prevent radical changes in volume when
switching between sources.
You can set to 0 dB or +6 dB
If the input level of the connected component is not high enough, increase the input level
properly. Without adjusting the line input level, you may be surprised at a loud sound when
you change the source from the external component to another source.
DEMO OFF / ON
You can change the initial indication on the display to information name (function name,
EQ name, etc...) while listen to a source.
DEMO ON
Displays information name while listen to source.
DEMO OFF
Cancels the function.
BEEP 2ND / ALL
Sets the beep sound every time a button is pressed.
BEEP 2ND
The beep is generated when a key is long pressed. (1 sec)
BEEP ALL
The beep is generated when any key is pressed.
Using the EQ (Equalizer)
Press EQ/XDSS repeatedly. The indicator lights up in the following order.
Pop t Classic t Rock t Jazz t Vocal t Salsa t Samba t User1 t User2 t Off
• POP : Optimized for R&B, Soul and Country music.
• CLASSIC : Optimized for orchestral music.
• ROCK : Optimized for Hard Rock and Heavy Metal music.
• JAZZ : Sweet sound with soft feeling.
• VOCAL : Powerful realism with strong sound quality.
• SALSA : Reproduces salsa music acoustics.
• SAMBA : Reproduces samba music acoustics.
• USER1 : Use the menu to set the sound level you want.
• USER2 : Use the menu to set the sound level you want.
You can adjust each sound level to your preference. Once you select a USER mode and then
make an adjustment, it automatically stored for the currently selected USER mode.
Refer to the "Adjusting the sound level" on the page 11
10