While spinning, is the frequency of the
water level 248 or more. The frequency can
be checked by pressing the [Spin] and
[Temp.] buttons at the same time on the
Press [Power] button with [Temp] and [Option]
buttons pressed after power off. Press [Start/Pause]
button 2 times. Does the drum rotate at low spin
Is it disconnected or badly contacted?
[White : 2 pin (
), Black : 2 pin ( ), White : 3 pin ( ),
Blue : 4 pin ( ), White : 4 pin ( )]
Check the motor connector, Is the resistance between
the terminal in figure the same as below?
Resistance between terminals
: 0.5 ~ 1.0Ω
: 1.5 ~ 2.5Ω
Be sure to unplug the machine before measuring.
1 2 3 4 5 6 7 8 9 10
Replace the PWB assembly.
Check the sensor
(Pressure) or hose
If the problem is on the
sensor or the hose, replace
the sensor or the hose.
Reconnect or repair it.
Replace the motor