If you press the
[Start/Pause] button when an error is displayed, any error except S/W ERROR will disappear
and the machine will change into pause status.
In case of
errors, if the error is not resolved within 4 min. power will be turned off automatically and the error code will be
blinked. But in case of
, power will not be turned off.
if the error is not resolved within 20 sec. In the case of other
Water has not reached to the pre-set level within 4 min. since
inlet valve operated, or water has not reached to the normal
level within 25 min.
The appliance is tilted.
Laundry is gathered to one side.
Non distributable things are put into the drum.
Water has not drained enough within 5 min.
Water is automatically being pumped out because too much
water is in the tub.
The sensor pressure switch is out of order.
button is pressed with the door open.
The door switch is out of order.
The thermistor is out of order .