Light Bulb Replacement; Power Interruptions; When You Go On Vacations; When You Move - LG BOTTOM FREEZER REFRIGERATOR Owner's Manual

Electrical Shock Hazard
Before replacing a burned-out light bulb, either unplug
the refrigerator or turn off power at the circuit breaker
or fuse box.
The refrigerator compartment has LED interior light-
ing and service should only be performed by a quali-
fied technician.
Change Freezer Compartment Light Bulb
1
Unplug refrigerator power cord form outlet.
2
Remove the screw using a Phillips screwdriver.
3
Grasp the light cover, pull the cover downward.
Make sure the bulb is cool to the touch.
4
Rotate the bulb counterclockwise to remove.
5
Replace with a new 40-watt appliance bulb.
6
Insert tabs on back of cover into slots in freezer ceiling.
Push cover up to snap front into place.
7
Tighten the screw using a Phillips screwdriver.
1
If the power will be out for 24 hours or less, keep all
refrigerator doors closed to help foods stay cold and frozen.
2
If the power will be out for more than 24 hours, remove all
food and store it in a different refrigerator or frozen food locker.
If you choose to leave the refrigerator on while you are away,
follow these steps to prepare your refrigerator before you leave.
1
Use up any perishables and freeze other items.
2
Turn off the icemaker and empty the ice bin.
If you choose to turn the refrigerator off before you leave,
follow these steps.
1
Remove all food from the refrigerator.
2
Depending on your model, set the thermostat control
(refrigerator control) to OFF. See the Setting the Controls
section.
3
Clean the refrigerator, wipe it and dry well.
4
Tape rubber or wood blocks to the tops of both doors to prop
them open far enough for air to get in. This stops odor and
mold from building up.
When you are moving your refrigerator to a new home, follow
these steps to prepare it for the move.
1
Remove all food from the refrigerator and pack all frozen food
in dry ice.
2
Unplug the refrigerator.
3
Clean, wipe and dry thoroughly.
4
Take out all removable parts, wrap them well and tape them
together so they do not shift and rattle during the move.
Refer to the Using your Refrigerator section for removable
instructions.
5
Depending on the model, raise the front of the refrigerator so it
rolls easier OR screw in the leveling legs all the way so they do
not scrape the floor. See the Door Closing section.
6
Tape the doors shut and tape the power cord to the refrigerator
cabinet.
7
Avoid lying the refrigerator on its sides as this could cause the
unit to malfunction when it is turned back on.
When you get to your new home, put everything back and
refer to the Refrigerator Installation section for preparation
instructions.