1. Turn the unit on.
2. Select a source.
3. Adjust the volume.
Basic operation - more you can do
Press VOL/MUTE to cut the sound. To cancel it, press again.
Using the EQ
EQ is to increase or decrease the signal strength of audio frequencies. The func-
tion helps you to enjoy sound more plentifully. Press EQ/XDSS+ repeatedly. The
indicator lights up in the following order.
POP t CLASSIC t ROCK t JAZZ t VOCAL t SALSA t SAMBA t
REGGAE t RUSSY t USER1 t USER2 t Off (not displayed)
• When XDSS+ is set to "Off", you can adjust the EQ settings.
• You can adjust sound level to your preference. Once you select a USER mode
and then adjust the sound level, it will be automatically stored for the currently
selected USER mode. Refer to the "Adjusting the sound level" for USER 1/2
CAR CD/MP3/WMA Receiver
Adjusting the sound level
Press SEL repeatedly to select the mode you want to adjust from VOL(volume),
BAL(left/right speaker), and FAD(front/rear speaker). To adjust sound quality,
When EQ and XDSS+ is set to "Off", you can also adjust the sound level
(BAS(bass), MID(middle), TRB(treble)) settings.
XDSS+ (Extreme Dynamic Sound System)
Press and hold EQ/XDSS+ . (XDSS+ : Improves the treble, bass sound.) To can-
cel it, press and hold it again.
Checking the clock
You can see the clock pressing DISP .
Setting the clock
When RDS CT information is not received and then you set CT on the setting
menu to OFF, you can adjust the time by yourself.
Refer to the page 11 for setting the CT(Clock Time) ON/OFF.
1 Press the DISP and then, press and hold it for more 1 second.
2 Press the
3 Press the
4 Press DISP again to finish the setting.
to adjust the hour.
to adjust the minute.