Introduction To Advanced Operations; Storing The Strongest Broadcast Stations Sequentially; Selecting The Area Group; Digital Signal Processor - Pioneer AVH-P5150DVD Operation Manual

Dvd av receiver
Hide thumbs Also See for AVH-P5150DVD:
Table of Contents

Advertisement

Section
Available accessories
04
Introduction to advanced
operations
1
Touch AV MENU and then touch
FUNCTION MENU to display the function
names.
The function names are displayed and oper-
able ones are highlighted.
2
Touch ESC to return to the TV picture.
# To return to the previous display, touch BACK.
Storing the strongest broadcast
stations sequentially
% Touch BSSM on the function menu to
turn BSSM on.
BSSM begins to flash. While BSSM is flashing
the 12 strongest broadcast stations will be
stored in order from the lowest channel up.
When finished, BSSM stops flashing.
# To cancel the storage process, touch BSSM
again.
Note
Storing broadcast stations with BSSM may re-
place broadcast stations you have saved using
P01 to P12.

Selecting the area group

1
Touch COUNTRY on the function menu.
2
Touch c or d to select the area group.
Touch c or d until the desired area group ap-
pears in the display.
COUNTRY1 (CCIR channel)—COUNTRY2 (IN
channel)—COUNTRY3 (CHN channel)—
COUNTRY4 (U.K. channel)—COUNTRY5
(OIRT channel)—COUNTRY6 (AUSTRALIA
channel)—COUNTRY7 (SAF channel)
68
En

Digital Signal Processor

Introduction of DSP adjustments

You can use this unit to control multi-channel
processor (DEQ-P7650/DEQ-P6600), which is
sold separately.
! Some functions may differ depending on the
multi-channel processor connected to this
unit.
Important
When a multi-channel processor and an optional
DVD player are connected to this unit, be sure to
use an optical cable (e.g. CD-AD600).
1 DSP display
Shows the DSP function names.
By carrying out the following settings/adjust-
ments in the order shown, you can create a fi-
nely-tuned sound field effortlessly.
1 Setting the speaker setting
2 Using the position selector
3 Auto TA and EQ (auto-time alignment and auto-
equalizing)
4 Adjusting the time alignment
5 Adjusting the speaker output levels using a
test tone
6 Selecting a cross-over frequency
7 Adjusting the speaker output levels
8 Adjusting 3-band parametric equalizer
1
Touch AV MENU and then touch
DSP MENU to display the DSP function
names.
The DSP function names are displayed and
operable ones are highlighted.
CRB2974-A/N
<
>68

Advertisement

Table of Contents
loading

Table of Contents