Download Print this page

KitchenAid KFGU706VSS02 Installation Instructions Manual page 8

30" (76.2 cm) and 36" (91.4 cm) gas built-in cooktop
Hide thumbs

Advertisement

Installing Brackets
Before Placing Cooktop
in Cutout
1. Using 2 or more people, place the cooktop upside down on a
covered surface.
2. Remove the attachment
screws for the selected bracket
locations from the bottom of the cooktop base.
3. Select bracket mounting holes that will allow the bracket to
extend far enough out from the cooktop for the installation of
21/2"(6.4 cm) clamping screws. See "Attach Cooktop to
Countertop"
for illustration of clamping screw installation.
i
I
I
A
B
A. Edge of cooktop base bottom
B. Clamping bracket
4. Attach brackets to cooktop base bottom with bracket
attachment
screws using the bracket mounting holes
selected in Step 2.
5. Rotate brackets so they do not extend beyond edge of
cooktop base.
6. Tighten screws just enough to hold brackets in place when
cooktop is put in cutout.
7. Using 2 or more people, turn the cooktop right side up and
place in cutout.
NOTE: Make sure that the front edge of the cooktop is
parallel to the front edge of the countertop.
If repositioning
is
needed, lift entire cooktop up from cutout to avoid scratching
the countertop.
8. Loosen the screws and rotate the brackets so that they are
perpendicular
to the edge of the cooktop base and extend
beyond its edge. Securely tighten screws.
Installing Brackets After Placing Cooktop
in Cutout
1. Using 2 or more people, place cooktop right side up into the
cutout.
NOTE: Make sure that the front edge of the cooktop is
parallel to the front edge of the countertop.
If repositioning
is
needed, lift entire cooktop up from cutout to avoid scratching
the countertop.
2. Remove the attachment
screws for the selected bracket
locations from the bottom of the cooktop base.
3=
Select bracket mounting holes that will allow the bracket to
extend far enough out from the cooktop for the installation of
21/2"(6.4 cm) clamping screws.
_"--F
l
B
................
E
4=
A. Cooktop
B. Cooktop base
C. Attachment
screw
D. Clamping bracket (extends far enough beyond
cooktop base to aflow instaflation of clamping
screws)
E. 2Y2" (6.4 cm) clamping screw (to be installed in
"Attach Cooktop to Countertop")
E Countertop
Attach brackets to cooktop base bottom with bracket
attachment
screws using the bracket mounting holes
selected in Step 3. Securely tighten screws.
Explosion Hazard
Use a new CSA International
approved
gas supply
line.
Install a shut-off
valve.
Securely tighten
all gas connections.
if connected to LP, have a qualified
person make sure
gas pressure does not exceed 14" (36 cm) water
column.
Examples
of a qualified
person include:
licensed
heating
personnel,
authorized
gas company
personnel, and
authorized
service
personnel.
Failure to do so can result in death, explosion,
or fire.
To Assemble
Pressure Regulator:
1. Using 2 or more people, stand the cooktop on its side or
back.
8

Hide quick links:

Advertisement

loading

  Related Manuals for KitchenAid KFGU706VSS02

This manual is also suitable for:

Kfgu766vss02Kfgs366vss02Kfgs306vss03