KitchenAid KEBU107SSS03 Installation Instructions Manual page 8

If you need to release tubing:
Push in collet to release tubing. With collet held in, pull tubing
straight out.
A
A. Collet
Connect to Water Filter Outlet (blue)
1. Attach the supplied %" to 1/4"stem or %" to 1/4"elbow quick
connect adapter fitting to the blue water filter outlet
connection by pushing the quick connect fitting past the
o-ring until you hit the backstop.
2. Connect another piece of copper water supply tubing to the
quick connect adapter fitting you just installed on the filter
outlet (blue) side of the water filter.
3. Pull tube to ensure it is secured.
Copper water supply
[] ] [] tubing to oven
Water
supply
connection
Yellow
WATER
IN
J
Copper water supply Blue
Shutoff tubing to WATER
valve cold water supply OUT
4.
Route copper tubing through undersink cabinet and oven
cabinet cutout.
NOTE: Due to temperatures around oven, copper tubing is
required.
5,
Connect the copper water supply tubing to the oven copper
tubing, using a 1A"to 1A" water supply union (not provided).
D
/
F
A. To home water supply
B. Rear of cabinet cutout
C. Copper water supply tubing from home water supply
D. _" to Y4"water supply union (not provided)
E. Oven copper tubing
F. Oven front
6. Turn on water supply.
7. Check all connections for leaks.
NOTE: No flushing or conditioning of the water filter is required
prior to use.
Excessive Weight Hazard
Use two or more people to move and install oven.
Failure to do so can result in back or other injury.
1. Using 2 or more people, lift oven partially into cabinet cutout
using the oven opening as an area to grip.
NOTE: Push against seal area of oven front frame when
pushing oven into cabinet. Do not push against outside
edges.
\\\\