Changing Stored Analogue C Hannels - Grundig FineArts ­55 ­FLE ­9170 ­SH User Manual

SpECIAL­SEttINGS
tuning­the­television­channels­by­
entering­the­channel­numbers
1 Open the menu with »mENu«.
2 Select the line »SOURCE SETUP« with »
or » « and press »oK« to confirm.
Λ
– T he »SOURCE SETUP« menu appears.
3 Select the line » Analogue Manual Tuning«
with » « or » « and press »oK« to confirm.
v Λ
– T he menu appears.
INSTALLATION
ANALOGUE MANUAL TUNING
Program No
TSystem
Band
Channel
Fine Tuning
Auto Previous Auto Next
4 Select the line »Program No« by pressing »
or » « and use »
Λ
5 Select »Band« by pressing »
< >
use »» « or »
(special channel) or »C« (normal channel).
6 Select the line »Channel« with »
enter the channel number with »
by step, or use »1...0« to enter the channel
number directly, or
start a automatic scan with »
« (yellow) .
»

Notes:
The current system is displayed in the
7
»System« line. If the colour or sound is
not functioning properly, select the line
»System« with »
to select the preferred s etting.
If fine tuning is necessary, select the line
7
»Fine Tuning« with »
>
or » « to make the setting.
7 Press »
« (blue) to save the setting.

­ 7 0
ENGLISH
­ - ---------------------------------------------------------------------------------------------------------
1
BG
C
2
0
48.25 MHz
Store
< >
« or » « to save the preset.
« or »
v Λ
« to choose between »S«
« or »
v Λ
< >
« or »
« (green) oder

<
« or » «. Use » « or »
v Λ
« or » « and use »
v Λ
Note:
If you wish to remedy other television
7
channels, repeat steps 4 to 7.
8­ Press »mENu« to end the setting.
«
v
Changing­stored­analogue­
­ c hannels
If channels were stored with the automatic chan-
nel search while tuning the television channels,
you can delete them. You can also store chan-
nels in a different preset, change or enter the
name of a channel as well as skip channels.
Selecting­a­channel­list
1 Open the menu with »mENu«.
2 Select the line »SOURCE SETUP« with »
or » « and press »oK« to confirm.
Λ
– T he »SOURCE SETUP« menu appears.
3 Select the line »Program Table« with »
» « and press »oK« to confirm.
Λ
– T he »PROGRAME TABLE« menu appears.
Note:
Additional operations are explained in the
7
following sections.
«
v
Deleting­channels
« and
1 In the »PROGRAME TABLE« menu, select the
television channel to be deleted with »
<
» «, »
Λ
firm.
« and
« step
2 Delete the selected channel by pressing
» « (yellow).

Note:
» « (blue) allows all television channels

7
to be deleted.
3 Press »

process.
>
«
<
«
>
« or » « and press »

« (green) to confirm the deletion
«
v
« or
v
«,
v
« (red) to con-