Setting The Date And Time; Timer Settings - Grundig FineArts ­55 ­FLE ­9170 ­SH User Manual

CoNvENIENCE­FuNCtIoNS
Setting­the­date­and­time
Automatic­setting
Your television set detects the difference in time to
Greenwich Mean Time (GMT) automatically, as
long as the channel selected transmits a time signal.
1 Select the line »Date & Time« with »
» « and press »oK« to confirm.
Λ
2 Select the line »Auto« with »
press »oK« to confirm.
– D ate and Time will be updated automatically;
or
3 Select the input box with »
the data for Date and Time with »1...0«
and press »oK« to confirm.
manual­setting
You can also set the difference in time manually
– for example, when the correct time is not de-
tected automatically or does not correspond to
local time for other reasons
1 Select the line »Time Adjustment« with »
then select the option »Manual« with »
>
or » «.
– T he lines »Time Zone« and »Daylight Sav-
ing« are active.
2 Select the line »Time Zone« with »
press »oK« to confirm.
– T he »Select Time Zone« menu appears.
3­
Select the appropriate time zone with »
>
» «, » « or »
v Λ
firm.
4 Select the line »Daylight Saving« with »
< >
and use » « or »
»Off« or »On«.
5 Press »mENu« to finish the setting.
« or
v
« or » « and
v Λ
« or » «, enter
v Λ
« and
v
« and press »oK« to con-
« to set the option »Auto«,
­------------------------------------------------------------------------
timer­settings
Entering­the­switch-off­time­­
(sleep­timer)
In the »Sleep Timer« menu you can enter a time
for the television to switch off. After this time
has elapsed, the television switches to standby
mode.
1 Select the line »Sleep Timer« with »
» «.
Λ
2 Enter the switch-off time with »
Note:
To switch off the function, use »
7
set the switch-off time to »Off«.
3 Press »mENu« to end the set-up.
Switch-on­timer
In the »Auto On« menu you can enter a switch-on
time for the television. After the preset time has
elapsed, the television switches on from standby
– at the preselected volume and the preselected
television channel.
«,
v
<
«
1 Select the line »Auto On« with »
and press »oK« to confirm.
2 Select the line »Mode« with »
<
use » « or »
should switch on.
3 Select the line »Input Source« with »
<
and use »
<
«,
4 Select the line »Service Type« with »
<
and use »
tion (ATV, DTV, Radio or DATA).
«
v
5 Select the line »Channel« with »
and use »
channel.
Note:
The line »Channel« is only active when the in-
7
put signal currently in use has been set. If no
entry has been made, then the first channel of
the selected input source will be used.
<
« or »
« or »
v
>
« to select when the television
>
« or » « to select the input source.
>
« or » « to select the p referred op-
< >
« or » « to select the preferred
ENGLISH
« or
v
>
«.
< >
« or » « to
« or » «
v Λ
« and
Λ
« or » «
v Λ
« or » «
v Λ
« or » «
v Λ
­ 5 5