Table of Contents
Advertisement
Symptom
The edge of the copy is dirty.
C1159O117DA
The image on the copy is not
aligned properly.
C1159O118DA
Possible Cause
The Original Pad or SDH Pad is
dirty.
You have selected a paper size
larger than the original.
(Zoom Ratio is set at full size
100%.)
The original is not placed in the
correct position. (Zoom Ratio is
set at full size 100%.)
The reduction ratio selected is
not in accord with the copy
paper size. (When doing manual
reduction copying.)
The original is not placed in the
correct position.
The originals may not be
suitable for use in the SDH.
1. When This Type of Copy is Produced
Action
Wipe the Original Pad or SDH
pad clean with a soft cloth
dampened with mild detergent.
(See page 45.)
Select the same copy paper size
as the original.
Reposition the original, or
reload the paper in the same
direction as the original.
Select the zoom ratio according
to the copy paper size.
(See page 17.)
Place the original correctly on
the Original Glass.
(See page 13.)
Or, load it onto the SDH
correctly along the Guide Plates.
(See page 14.)
Raise the SDH and place the
originals on the Original Glass
one at a time. (See page 14.)
41
Hide quick links:
Advertisement
Table of Contents
