Drum Dehumidifier; Drum Dehumidifier Function - Minolta CSPRO EP1031 Manual

Hide thumbs Also See for CSPRO EP1031:
Table of Contents

Advertisement

2. Drum Dehumidifier

Drum Dehumidifier Function

High humidity or rapid changes in the temperature of the room (such as when a heater is used in a cold
location) can cause condensation
be blotchy. The Drum Dehumidifier removes this condensation.
1. Condensation: Moisture in the air collects as droplets on cold surfaces.
2. PC Drum: The part of the copier that works much like photographic film.
Before Dehumidifying
Turn the Main Switch off. While pressing
1
the 6 Exposure Control Key, turn the
Main Switch on. The copier is now in the
Drum Dehumidifier mode which will
continue for approximately three minutes.
Press the Clear/Stop Key to stop the Drum
2
Dehumidifier mode.
1
on the photosensitive drum
C1159O048DA
C1159O046DA
2
of the copier which causes the copies to
After Dehumidifying
NOTE
Copying can be performed while the Drum
Dehumidifier mode is in operation.
The Drum Dehumidifier mode cannot be started
during the operation of Toner Replenishing,
starter charging, paper misfeeds or other types
of trouble.
23
C1159O047DA

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cspro ep1031f

Table of Contents