Table of Contents
Advertisement
3. Turning ON/OFF and Initial Mode
Turning ON and OFF
When the Copier is Turned ON
The LED in the start key will remain off while the copier makes preparations for copying. After
approximately 10 seconds, the LED in the start key will come on and copying can be started. At this time,
if an original is placed in the Semi-automatic Document Handler (SDH), the copier will be set into SDH
mode copying.
Initial Mode
The copy mode will be displayed on the control panel when the Main Switch is turned on. This is called the
initial mode. This is the mode that forms the basis for all control operations.
Number of Copies: 1
Turning Copier ON
Press the Main Switch to the (ON) position.
Turning Copier OFF.
Press the Main Switch to the
If the copier has not been used in the past 30 minutes,
the Auto Power Off function turns the copier off.
(See page 10.)
C1159O010DA
C1159O011DA
Zoom Ratio: 100%
Copy Density: Auto Exposure
NOTE
9
(OFF) position.
C1159O012DA
Paper Source: Drawer
Hide quick links:
Advertisement
Table of Contents
